Electronics Forum | Tue Jan 14 15:38:28 EST 2003 | fujispares
Hi, CP3 will have trouble placing 0603 parts - I wouldn`t use a CP3 for these parts - A CP4 will be more suitable. A older CP4 feeder will fit and function on a CP3.
Electronics Forum | Fri May 23 07:07:39 EDT 2003 | qp1
Please your comments for placing 0402 on CP4? Which are the difficulties to expect and how to threat them? How to adapt the feeders for the smaller interdistance of the tape?? Thanks
Electronics Forum | Tue Dec 28 01:01:45 EST 2004 | mhe
Hi, where could i get a used CP4 D axis servomotor? thanks in advance. rgds deepak
Electronics Forum | Thu Jun 29 12:41:26 EDT 2006 | chrisgriffin
I once had a CP-4 that was not cutting the paper from the reel, and the paper was nocking off the parts. You could also check the vacuum at pick-up and placement stations. What kind of parts are they? It might be a good idea to calibrate the stati
Electronics Forum | Wed Jul 18 00:35:13 EDT 2012 | fujiphil
If you have the backup files for your program and proper. Try to flush-out the machine memory. Then try again to report CP4 to flexa. If the reporting went good, the communication must be ok. Resend the proper and program.
Electronics Forum | Fri Jul 20 02:02:54 EDT 2012 | fujiphil
Have you ever try to replace the CP4 CPU card? Please try replacing CPU. Some cases, machine will boot normal. But no communication to the other machine.
Electronics Forum | Wed Dec 05 17:58:55 EST 2012 | CAN
Does anyone have an operating manual and programming software for a CP 4-3? If so could you please contact me!! Thanks in advance!
Electronics Forum | Thu Nov 14 17:22:47 EST 2013 | dman97
Yes CP4 with vision type 12 will place these no problem. I am even putting these down on an old CP3 with no problems.
Electronics Forum | Mon Jan 30 03:42:49 EST 2006 | daxman
Thanks for the reply fellas, I spent all day today working on these machines, and indeed, this is bizzare. The main line was in production, and the placement was excellent on the CP6. I transferred a reel (400 parts per board) to the CP4 and the p
Electronics Forum | Thu Apr 06 14:29:11 EDT 2006 | vikkaraja
check placement XO/YO and mark read position using fuji board.