Electronics Forum | Thu Mar 25 11:19:11 EST 2004 | paul_bmc
Thanks for the informative posting.. When I power up the machine this is what I get.. 1. The movable cutter does not actuate the cutter knifes. (The head still jogs 360 and the movable cutter moves in the linear axis but the c&c motor does not act
Electronics Forum | Thu Nov 10 06:00:36 EST 2005 | stepheniii
Break off the break-away? If you are going to fixture the board why not just buy a cutter?
Electronics Forum | Fri Feb 15 15:11:56 EST 2008 | dphilbrick
Contact me @ sales@worldeb.com
Electronics Forum | Tue Jun 14 17:21:46 EDT 2011 | isd_jwendell
I use a pizza cutter with parts closer than that, but they are small-ish (
Electronics Forum | Mon May 15 02:31:21 EDT 2017 | robl
or pressing, or cutters and linishing if low volume. If high volume I'm with Pavel on routing.
Electronics Forum | Fri May 13 22:21:05 EDT 2022 | glasscake
Alcohol? Crud-cutter? Cant recommend much without knowing plating(if any).
Electronics Forum | Thu Nov 03 12:49:23 EDT 2022 | emeto
Wonder why do you need to do this transition? Pizza cutter is pretty simple to use and maintain.
Electronics Forum | Mon Mar 05 18:04:43 EST 2007 | stepheniii
If it might go in a clean room you will want to look at if the system cuts the paper tapes. In the old days there was no vacuum at the cutter and around the machine would accumulate white dust from the machine cutting the tape for each component. The
Electronics Forum | Fri May 11 06:45:57 EDT 2007 | jdumont
On some of our boards we cut the clinched leads with an old Q Corp cutter. Works fine as long as the blade is sharp and the lead isnt bent against the board. Youll know when you go to far on the clinch because the mass lead cutter will begin to start
Electronics Forum | Wed Nov 25 12:33:16 EST 1998 | Scott Snider
| A buddy of mine has problems after depaneling double sided pre-scored PCB's. Resistors near the edge, after put into the slice and dice machine contain micro cracks. He's checked for them before and after depaneling. We figure it is the sectioni