Electronics Forum | Wed Sep 15 11:44:46 EDT 2004 | mriddle
Dear SC, Are you looking for a cold solder detection tool for SMT,through-hole or both?
Electronics Forum | Wed Jul 05 00:57:17 EDT 2000 | Roni Haviv
Hello, I need some information about the DPM of escape defects that were detected in ICT -not including defects that were detected in visual inspection sooner. I'll appreciate any kind of information, Thanks Roni
Electronics Forum | Fri Sep 03 11:28:18 EDT 2004 | KenF
Fine crack in multi-layer ceramic capacitor (MLCC) may not be detectable by capacitance check.Could anyone out there advise which is the most appropriate method to test/detect fine crack ?
Electronics Forum | Mon Jun 18 16:48:00 EDT 2001 | Gil Zweig
We have found a significant number of PBGA problems associated with physical deformation of the package. Deformations such as dishing (potatoe chipping) and delamination under the die (popcorning). These can be detected by x-ray by the variation patt
Electronics Forum | Wed Mar 02 04:47:41 EST 2022 | shrikant_borkar
Dear All Hopefully you got the situation on SIPLACE D1i and SIPLACE D2i. Pickup up Place machines. Is the lead bend upward of SMT transistor detection is possible on this machine? If not is it possible to get it detects by optimising it's windows.
Electronics Forum | Mon Jun 18 11:06:31 EDT 2001 | Gil Zweig
In-line systems are effective in detecting the obvious defects such as solder bridges, missing balls and excessive solder voids. They may not be as effective in detecting the subtle changes in solder bond shapes (signatures) indicating loss or chang
Electronics Forum | Wed Apr 13 21:47:32 EDT 2005 | Dhanish
In production,we are seeing high defect for Hair Line Solder Shorts for PTH connector and the Hair Line is too tiny that X-Ray and ICT could not detect.Any suggestion on how we can resolve or at least detect this upfront.
Electronics Forum | Fri Apr 15 09:10:09 EDT 2005 | Dhanish
The biggest problem I am having is the X-Ray and ICT could not detect this shorts.ICT could not detect because onboard measurement shows Zero even without the Hair line shorts.With Hairline there is no difference in the impedance value for ICT to fai
Electronics Forum | Mon Jul 27 20:35:13 EDT 2009 | michaellaw
This is the common problem for RH6 m/c.You need to check of the following: 1)Make sure the spiral corl is secure properly especially near to detection amplifier box 2)you may try to fine tuning the sensibility VR on the detection card. 3)change the t
Electronics Forum | Mon Feb 08 23:44:31 EST 2010 | glennster
Woody, Daisy chain packages are definitely needed, but if you can get packages with a dummy chip inside these will provide a more accurate simulation of working components. If possible, continuous monitoring of resistance during the test will be