Electronics Forum | Mon Jul 11 12:42:46 EDT 2005 | machine designer
I need a good digital photo or two of the turret of a Siplace (or equiv) style SMD pick and place head preferably laden with die or SMD parts to explain a bulk handling concept to some machine neophytes here. I could alternatively use an image of any
Electronics Forum | Thu Jun 06 08:16:13 EDT 2002 | caldon
Jim- Sorry I can not offer advice on the Panasonic machine but do want to shed light on the Die and waffle pack issue. Take note that if the Die are loose in the pockets the balls or terminations could be damaged. The thin layer that the ball is atta
Electronics Forum | Mon Feb 12 08:37:04 EST 2018 | dontfeedphils
The piece that splits the vision probably has smudges or scratches on it. You're able to teach a set of pads. Before teaching the fid, hit the "Draw Correlation Box" button (I think that's what it's called, it's been a couple years). Then draw a b
Electronics Forum | Tue Feb 23 02:43:37 EST 2021 | gabriel1blue
We just came out with a new problem with these machines. We had to shutdown for a a few weeks due to Covid-19 and now they have errors when we start them up. Looks like the back up batteries died and after we replaced all of them the settings are com
Electronics Forum | Tue Nov 01 14:46:31 EDT 2011 | davef
Agilent TestJet Technology White Paper In the early 1990s, the testing of digital parts became problematical. Previous in-circuit test techniques sought to ensure a correct, functioning part by applying digital patterns, called vectors, to the input
Electronics Forum | Wed Dec 10 18:47:28 EST 2003 | Rob Sierra
Hi James, Mag-D Electronics in Los Angeles ALSO carries ALL Tape Splicer tools and tapes. You can reach Mag-D Electronics at 818-762-0058 or http://www.magdelectronics.com. We also carry Adhesive Back Die Carrier Tapes and Feeders.
Electronics Forum | Tue Jun 29 12:56:16 EDT 2021 | babe7362000
Does anyone have a manual for the FKN Systek N200? And also where I can get dies/blades for it? Thanks
Electronics Forum | Mon Oct 06 11:13:32 EDT 2003 | marmotzj
Dear All, I'm encountering a problem on mounting Intel E7501 and P64H2 FC-BGA chips. After the SMT process, these two BGAs were defected. Both had power-to-ground short circuits on the die package itself, and also the die resin had cracking tracks
Electronics Forum | Wed Sep 11 12:52:14 EDT 2002 | slthomas
We have found that using the SPC capability of the profiler's pc software helps us identify oven malfunctions sooner than we would normally find it. The ovens tend to compensate for dieing or dead blowers by cranking the heaters on for longer cycles
Electronics Forum | Wed May 08 10:21:05 EDT 2019 | compit
During the start the error "DOWNLOAD VISION ERROR" - instead of "OK" is "NG". - resolved - video card died. But I still have a motor overload error Y1 (L057:CUR.DEV ... Y1 error) - what resistanc
