Electronics Forum | Wed Feb 15 01:49:34 EST 2017 | soldertraining
Hi I completely agree with you. Also, the Dry Solder paste can be used in wireless repair operations such as the repair of smart phones, tablets, laptops and other handheld devices. The lead-free solder paste can be squeegeed through the apertures of
Electronics Forum | Thu Feb 08 12:02:15 EST 2001 | slthomas
After reading the variety of responses, I feel moved to ask if you're you talking about what are occasionally referred to as solder beads (mid-chip solder balls, attached to the waste line of your chip caps and resistors) or the solder balls that ten
Electronics Forum | Wed Jul 02 07:00:56 EDT 2003 | davef
Title : SOLDER JOINT RELIABILITY OF Sn-Ag-Cu BGA COMPONENTS ATTACHED WITH EUTECTIC Pb-Sn SOLDER PASTE Author : Fay Hua et al. Author Company : Intel Corporation Date : 01/01/2003 Source : Journal Of Surface Mount Technology, Volume 16-
Electronics Forum | Mon Nov 15 15:27:48 EST 2004 | davef
In creating your solder balls, consider printing or dispensing solder paste on the pads of the LGA and then reflowing the paste.
Electronics Forum | Wed Jun 14 18:21:23 EDT 2000 | Robert Moore
It has been our experience that the problem you have discribed was not solder process related. We had two such instances in the past and both were component related. The first case involved a PLCC28 that failed test. Reflowing the solder seemed to co
Electronics Forum | Mon Jun 26 00:22:26 EDT 2006 | YQ Deng
Through the pads of conncector(50pin) were printed full solder paste, the solder paste of about 2-5 pads follow to bottom of the connector 2-5 pins, the 2-5 pads outside of connector no any tin after reflow. Is this PCB problem? I can supply failur
Electronics Forum | Thu Jan 12 13:21:11 EST 2006 | barryg
Opinions. I have a large finned heatsink that we place over a D2pak transistor. This heatsink is designed to heatsink the transistor through the junction of the pad area that the transistor is attached to. The paste pattern we chose was small dots ar
Electronics Forum | Fri Oct 17 22:36:35 EDT 2008 | arosario
Hi All, We just started build a new product and I am encountering many non-wet rejects in our new product. I need help on what should I look into to improve our Yield. Please see below back ground 1. We are using DEK Infinity as printer. 2. We are mo
Electronics Forum | Wed Sep 26 12:16:44 EDT 2012 | bwjm
Hi Guys,recently i am facing an issue. Refer to the attached photo. This PCB is high RF speed, gold immersion single layer. After reflow, my solder seems to have black stains on it. I tried with SAC305 paste water soluble and no-clean, both results a
Electronics Forum | Sun May 23 07:13:56 EDT 1999 | Scott Cook
| Has anyone had any experience or data using vibration during the reflow process. | We introduced a vibration device attached to the fixed rail on a Vitronics reflow oven. The reason was to prevent skewing on large PLCC devices. The process worked v