Electronics Forum | Thu May 03 21:59:23 EDT 2007 | davef
dry and cabinet
Electronics Forum | Mon Oct 04 10:02:09 EDT 2010 | babe7362000
I have a question about Drying a PCB after it goes thru the washer. Just wondering if others have to dry components off using air at the end of the wash? Our current process is that we wash the boards and dry certain parts off with the air hose aft
Electronics Forum | Wed Jun 22 09:50:53 EDT 2011 | mosborne1
McDry - don't even waste your time with anyone else..
Electronics Forum | Fri Jun 24 12:29:40 EDT 2011 | deanm
Manoel, No, we do not use Totech dry boxes. Just another name to consider.
Electronics Forum | Fri Sep 28 00:50:40 EDT 2018 | benny
How much is the exposure tolerance for PCB auto dry film?
Electronics Forum | Wed Feb 21 20:00:09 EST 2001 | davef
Sounds like you received some good advice. Most of our stencils are used once a day [at most], so more often than not they are air dried. If we goof-up and need to reuse a stencil during a day when we have limited drying capacity, we wipe the lowes
Electronics Forum | Fri Sep 25 11:07:45 EDT 1998 | Chris Fontaine
We use dry boxes manufactured by DMS Clean Room Products in Lawrence, MA. The phone number on the tag is (508)683-2325, but I think their area code changed to either 978 or 781 recently. We flow dry nitrogen through the box in order to ensure that
Electronics Forum | Mon Aug 31 13:04:13 EDT 2009 | bandjwet
We have tried air drying (using shop air) our SMT stencil post sonic cleaning. This technique only "pushes" the water droplet around to the other side of the stencil. Air drying causes the "Invar" stencils to rust as the water sits on the stencil sur
Electronics Forum | Wed Jun 22 01:57:28 EDT 2016 | sachinverma
we face the problem to last month dry solder issue.when we found PCB is dry. (PTH not fill not properly)then we change the parameter like flux Tank pressure increase 130 to 250. after these activity PCB is ok no dry solder found......but problem is o
Electronics Forum | Fri Feb 10 05:34:55 EST 2023 | ysundar71
Thanks for the comments. As per D Revision of J STD033, clause 5.3.3.2: Dry cabinet at 5% RH SMD packages not sealed in a MBB may be placed in a dry atmosphere cabinet, maintained at not greater than 5% RH. Storage in these dry cabinets may be consid
