Electronics Forum | Wed Jul 21 16:21:19 EDT 2004 | bobpan
Steve, We sent them back to the manufacturer and 'if' they are repairable they will repair them for a minimal cost...haha... and send them back to you. Have fun....
Electronics Forum | Thu Jul 22 11:51:49 EDT 2004 | Steve
I have found a company called Cleveland Motion Control that will fix them for a flat fee. Did a little searching and found them using Altavista.com Cheers
Electronics Forum | Wed Nov 23 07:45:39 EST 2016 | bukas
hello, I have a GSM2 machine with faulty motor driver (i guess), usually when this error occurs i would rest it via button on a panel several times, but this time it doesnt work. what should i check/ measure to locate this problem? there is 7 blink
Electronics Forum | Thu Aug 12 15:39:36 EDT 2021 | bukas
it can be cable. can you swap cables with next driver? also swap cables on head. if same driver shows error you need new driver probably. if new driver shows error then its cables or motor. check documentation to see what motor it drives. you cant sw
Electronics Forum | Thu Sep 05 14:44:41 EDT 2019 | jbaez1
Looking for Pack Driver or driver unit 630 119 8361 from HSP4797 (Universal, Sanyo or Hitachi): Tag information: Pack Driver Model: D2890B S ver. 0.16 W ver. 0.00 Made in Japan
Electronics Forum | Tue Sep 16 09:29:19 EDT 2003 | Graeme
Jan When you fit these new unit drivers check to see if the software level is the same as what is in the remaining unit drivers, as if it is not you will find that there is a steady failure of other exsisting unit drivers.If the software level in the
Electronics Forum | Thu Feb 10 12:47:47 EST 2022 | bukas
1. disable driver update (system and regkeys) 2. reboot in safe mode 3. disconnect internet 4. uninstall any nvidia driver using IO Bit uninstaller 5. uninstall nvidia and intel drivers using DDU 6. reboot in normal mode 7. install intel driver from
Electronics Forum | Wed May 19 09:32:28 EDT 2004 | Mr Fix it - MPM
Sounds to me like the driver for the tactile is not working. The tactile has three components to it. The first is the switch, the second is the pneumatic up/down actuator and the third is a small motor in the tactile assembly. The motor has a driv
Electronics Forum | Fri Oct 04 14:11:14 EDT 2002 | franciscoioc
Does any one have a copy of the mpc-29 dehart printer drivers. We our hardrive crushed and we cannot recover this data and we don't have the driver discs
Electronics Forum | Tue Oct 14 07:38:29 EDT 2014 | dilogic
Z axis drivers are located in co-salled LP servo bay. It is 19" rack mounted in lower left part of the machine. Head1 z axis driver is in slot 4 and head2 driver is in slot 6
Focusing on the SMT field for more than 15 years, QYSMT has been committed to meeting the needs of customers and partners. Our mission is to provide the best solutions while helping to reduce costs and increase efficiency.
Manufacturer / Equipment Dealer / Broker / Auctions
2nd floor, West side, Building 12, Hengmingzhu Industrial Park, 32 Xiangxing Road, Shajing Tongfu Industrial Zone, Baoan District
Shenzhen, China
Phone: QYSMT / MOREL USA CONTACT – SUSANTA TRIPATHY.: 1-912-373-4005 / China Contact: 86-075521635007
