Electronics Forum | Sun Oct 24 08:07:06 EDT 2021 | artem
Hello, I have a Mydata TP11-UFP which stopped working. It prints F-MOT1-38/245:MSETDYNX during initialisation. Any idea what could be wrong? I have already replaced the capacitors and the Inrush Current Limiters on the "L-19-588-18" board. Also ins
Electronics Forum | Wed Aug 13 17:31:46 EDT 2003 | Jeff
Hello, i had this idea and i was wondering if someone could give me some advice on how to accomplish it. I would like to create a digital recording, like you would find on various keychains, or childrens toys (ex:tickle me elmo). The recording can be
Electronics Forum | Sat Sep 25 08:59:59 EDT 2004 | davef
IPC-HDBK-830, Guidelines for Design, Selection and Application of Conformal Coatings says: A conformal coating may have several functions depending on the type of application. The most common are: * Inhibit current leakage and short circuit due to h
Electronics Forum | Fri Sep 05 09:33:32 EDT 2014 | cflames17
It could very well be the Safety Relay located inside the ELMO PSU (Bottom left in computer cabinet). I just had the same problems on 2 MY9's within 2 months apart. the Part cost around $700.00 from Mydata (Now Mycronic). These fail commonly with old
Electronics Forum | Wed Sep 19 10:34:44 EDT 2018 | sarason
Now I have to guess and make a few assumptions. Without looking at the back side of the board my guess is you have some 400-100V diode bridges before the resistor ,zener and the FET . The FET is a 500V 0.85 Rdson NFET. All of this suggests a chopper
Electronics Forum | Fri Dec 13 10:23:55 EST 2002 | davef
Bright ideas??? Bright ideas!!! I got bright ideas. In order of decreasing luminosity: * Stop installing the socket, solder the PLCC to the board, dip the board. The socket is a waste of time and money. You never replace the PLCC in the field, a
Electronics Forum | Thu Dec 22 21:29:05 EST 2005 | davef
Josh: Room Temperature Vulcanizing (RTV) is Dow Corning's trade name for it's family of silicone cure sealants. RTV is about the worst kind of coating there is. Its chemistry is highly ionic and it requires atmospheric humidity absorbed to "complete
Electronics Forum | Fri Jan 10 03:33:42 EST 2014 | hans88
hello people, we have a my12 wich has a problem it gives the following error during hardware initialization: F-MOT-MSETDYN Y/1236 :Motor amplifier channel a error. after this error it says hardware initialization failed. this prevents us of using
.gif)
