Electronics Forum | Thu Mar 26 12:22:22 EST 1998 | Bill Schreiber
The Smart Sonic Stencil Cleaning Process has been very successful in cleaning misprinted ceramic substrates. We would be happy to test clean your product. Contact me toll free at (888) 499-7440. Bill Schreiber | We currently use an abrasive fiberg
Electronics Forum | Tue Apr 05 09:10:12 EDT 2005 | Dave G
You may have to get him to see a dermatologist or allergy specialist. Also, analyze exactly what he's coming in contact with during the course of a workday. Some people are allergic to what the rest of us have no trouble at all with. One thought - If
Electronics Forum | Fri Jun 02 09:53:11 EDT 2006 | ratsalad
I used 1' of McMaster part # 8821K6 (0.110" thick). It is rated to 600F. I believe I put four layers over my profiler but I'd recommend starting with two. If you need more you can add it. Make the sock good and tight because the fabric seems to h
Electronics Forum | Wed Jan 14 17:07:46 EST 2009 | davef
In BIG-boy, high vibration applications to secure large components, we've used 3M #2214 structural adhesive [One part, 250*F (121*C) curing 100% solids, paste consistency epoxy adhesives designed for bonding metals and many high temperature plastics
Electronics Forum | Sat Dec 18 08:23:33 EST 2010 | remullis
I experienced warpage on a 7'x 13" long board, unfortunately my oven does not have center support. I use stiffeners on both of the short ends. It fixed my problem. Some of the things I was experiencing with the warpage on the second pass were placem
Electronics Forum | Tue Nov 22 19:54:45 EST 2022 | davef
Every year, for the holidays, grannies come to the camera store to get their point & shoot cameras fixed. They've replaced the battery, but it still won't work. In the past, we used the eraser on the end of a No.2 pencil to buff the corrosion from th
Electronics Forum | Wed Jun 30 10:37:11 EDT 1999 | Boca
We are wave soldering some fabs with a lot of unmasked trace area along the edges. The trace area is solid copper covered with tin / lead, no masking, no components along the edges, same on solder side and component side (goofy board design). Inste
Electronics Forum | Wed Jun 30 11:38:05 EDT 1999 | Brian Conner
| We are wave soldering some fabs with a lot of unmasked trace area along the edges. The trace area is solid copper covered with tin / lead, no masking, no components along the edges, same on solder side and component side (goofy board design). Ins
Electronics Forum | Tue Nov 03 10:33:10 EST 1998 | Chrys
| We run stiffeners on all of our product through our wave solder process and most of our product through our reflow and adhesive cure oven. The problem is we continually put on and take off stiffeners because of poor reliability of stiffeners stayi
Electronics Forum | Tue Nov 03 12:23:00 EST 1998 | Bill Schreiber
Kelly, How are you cleaning the stiffeners? The Smart Sonic cleaning process has been very successful in such applications. Visit the Smart Sonic Web Site at: www.smartsonic.com Or call me at 1(800) 806-440-R. Regards, Bill | We run stiffeners