Electronics Forum | Tue Feb 19 12:17:14 EST 2013 | emeto
Push the pedal and help yourself with a screwdriver to take the stencil out. Once you do that you can see clearly which side is not opening and closing. Than you just fix that side. Your instructions on how to do that should be with your spare hoses.
Electronics Forum | Tue Feb 19 13:49:15 EST 2013 | cbeneat
I appreciate the help, I tried a small amount of force, but I didn't want to trash the stencil, I got hold of the where we purchased it and they are going to repair, if they trash the stencil they will cut us a new one.
Electronics Forum | Thu May 03 18:40:34 EDT 2001 | pzohbon
We produce a board right now with a QFP that has 20 mil pitch and we are seeing problems with the solder deposition. I believe it to be a cleaning issue which we are addressing. Soon we will be pasting for bga's. Is there a problem with using inter
Electronics Forum | Fri May 04 12:28:12 EDT 2001 | slthomas
We have had some success printing 20mil pitch with our IIT Proframe. It takes some babysitting, and you don't want your operators to be changing these things out every hour or you'll be buying lots of them. Pulling tension in one direction gives r
Electronics Forum | Fri May 04 18:55:49 EDT 2001 | johnthor
actually the "yellow lite" part of my posting was simply spoofing Dave's light up band-aid wrappers. But seriously (again) most high temperature Kapton polyimide film tapes, like 3M #92 and #1205, develop a considerable charge when unrolled or remov
Electronics Forum | Sat Sep 12 10:47:00 EDT 1998 | Jon Medernach
I am aware that the Intel processor is available in a 0.012" leadframe, as a TAB product ( which can be excised and placed with may P&P machines but I do not know of any 0.008" leadframes, Bumped Die are at these pitches and frankly I would bet dime
Electronics Forum | Tue Jul 27 12:45:34 EDT 2010 | kmtan
Hi expert, we have one lead frame product proposed to send to flux clean recently. The problem here is the frame is attached with high temp tape. After flux cleaning the frame, the tape turns out deformed in which we think it was due to chemical reac
Electronics Forum | Fri Jan 28 13:34:18 EST 2011 | rodrigo
Hi all, I just finished programming a board in this AOI machine and I'm getting the same IC rejected in every board with this error: Inspection window out of frame range. I don't know how to fix this because the frames get generated automatically
Electronics Forum | Fri Jan 28 14:58:00 EST 2011 | hegemon
When reviewing the defects, I believe you can select the part, right click on it, and select "create new frame". This would create a new frame with that part alone in it, and centered. Better inspection for that part. Possibly this won't work with
Electronics Forum | Wed Jul 05 14:55:53 EDT 2023 | robertobsuinc
How can I adjust the stencil frame size on my MPM speedline accela? is there an automatic option or I need to do it manually?
