Electronics Forum | Wed Apr 24 11:11:31 EDT 2002 | cnoonan
Sounds like your problem is your camera setting for Head 1 (Gain & Offset), are you rejecting any other parts on that head? Go to (Set) (Propers) (Cameras) (Gain & Offset) you can then zoom in and out to check light contrast. Check the numeric col
Electronics Forum | Tue Nov 30 17:26:41 EST 2004 | donb
Thanks for the advice folks, but we only have one Fuji Engineer in Australia, and he is in Asia for training. I haven't looked at the machine yet, but am told it is misplacing small parts. It may only be the camera that needs calibrating, but I won't
Electronics Forum | Mon Dec 18 21:23:13 EST 2006 | jgarver1
The spline shaft is bent. I have replaced a number of these over the years with the exact same symptoms. How is your placement? Your 180 degree placements should be skewed if the shaft is bent. 0 Degree placements are typically acceptable due to
Electronics Forum | Mon Aug 22 08:09:51 EDT 2005 | cyber_wolf
The only time I have seen any Fuji IP need calibration is if you have had a serious crash, or if an axis or camera has been removed. Make sure you don't have something else going on. For instance check these things: 1.Check nozzle vacuum 2.Make sur
Electronics Forum | Tue Feb 24 15:32:10 EST 2015 | swiese242
Hi there. I have an IP3 machine that refuses to > power up the MFU cart on side 1. I have already > replaced the I/O card but still no dice. Is > there a relay or fuse that I need to check to get > this to power up? The machine will not operate
Electronics Forum | Thu Apr 25 21:58:54 EDT 2002 | Gang shen
thank all of your kind help.today I set the camera gain and offset same as the camera2,the gain is 180,and the offset is 105. First the vision process is failed to pass ,later I found the size of the BGA ball in the screen is so smaller than the rea
Electronics Forum | Wed Apr 24 03:24:53 EDT 2002 | Gang shen
today I succeed placing the BGA at the other table(table2), the part data is only changed with "pitch_limit"=50%,lead_check_ area=50%,lead_brightness=0. but when I process vision at the tale1(which equipped the MTU),still failed,the error message is
Electronics Forum | Wed Apr 24 10:32:47 EDT 2002 | dougt
BGA's are sometimes difficult for a camera to recogonize as your not looking for the dark outline of a part with white lighting behind it but rather the white balls with in that dark component. If you don't mind experimenting a little I would play wi
Electronics Forum | Mon Jun 05 22:40:40 EDT 2000 | Dean
...well, if I had Fuji in on 4 occasions and the problem is not resolved I would wonder what exactly I paid for... Here is what I would do. 1. Run the glass plate program. This will eliminate variables in your production parts and boards. Additi
Electronics Forum | Thu Jun 10 16:23:11 EDT 2004 | davem
Hi Grant, In previous positions I've had experience with the Fuji CP43, CP6, CP642, CP643, CP65, IP3 & QP242. In operating, training and process engineering capacities. Presently, I'm working with 2 SMT lines (in a process engineering capacity) wit