Electronics Forum | Tue Nov 29 22:32:51 EST 2005 | davef
The dissolution rate of nickel into tin is a lot slower than that of copper [into tin]. This results in a nickel-tin (Ni3Sn4) intermetallic that is only 0.25-0.75�m thin after a normal soldering process. The Ni-Sn intermetallic compound tends to be m
Electronics Forum | Mon Oct 25 21:28:38 EDT 1999 | Dave F
3%) concentrations of gold form brittle intermetallic compounds with the tin in your solder. Electroless gold is applied with an autocatalytic process that self-limits around 5 mils thickness. You're correct electrolytic gold is used for goldfinger
Electronics Forum | Thu Jun 14 06:41:28 EDT 2007 | davef
No, raising the solder pot temperature to 800*F will not affect affect your solder alloy. We expect that you had a fairly high level of intermetallic compound generation, but most of that would be included in the fairly high dross generation that ha
Electronics Forum | Tue Sep 24 18:38:54 EDT 2019 | researchmfg
Well, there may be a misunderstanding that people think the IMC layer grows the thicker the more strong soldering strength. Actually, the IMC layer can be grown and distributed evenly at the interface between Cu-based, Ni-based and Sn-solder will be
Electronics Forum | Wed Sep 10 12:56:09 EDT 2003 | davef
Intermetallic compounds [IMC]: * Form during the alloying process of some metals. In soldering these are Sn, Ni, Ag, Cu, Au. * Do not accept solder. * Increase in depth in logarithmic proportion to both time and temperature. [So during the solder
Electronics Forum | Thu Sep 16 17:22:16 EDT 1999 | DaveJ
We have some SMT components with gold plated leads. They're actually LCC led packages. A good solder alloy to use would be Indium / Lead to reduce tin dissolution into the gold and avoid the resultant brittle intermetallic compound. However, a recomm
Electronics Forum | Thu Nov 01 17:40:52 EST 2001 | davef
Listen to Wolfgang. Your dull solder connection is a process indicator. Some 63Sn / Au solder connections look grainy, depending on how your process them and the materials involved. Gold dissolving in tin forms an intermetallic compound [AuSn4] th
Electronics Forum | Wed Aug 06 20:50:42 EDT 2003 | davef
Well, if it "keeps coming up", let's take a pass at keeping down. For: * Requirement that gold be removed from components, pads, etc. is J-STD-001C, 5.4.1 * Context of that requirement [J-STD-001C, 5.4.1] and 6 or 7 references are in IPC-HDBK-001.
Electronics Forum | Sun Apr 24 09:12:00 EDT 2005 | davef
We're not sure what your customer is talking about either. Gold and tin form an intermetallic compound [IMC] that can cause poor solder connections. To minimize the potential of a problem, keep gold to less than 3 percent of the metal. [Search the
Electronics Forum | Fri Jun 24 07:02:35 EDT 2005 | davef
Problem 1: Solder shortage * Stencil aperatures [except the heat slug] should be 1:1 with the board. * Stencil should be 5 thou thick laser cut. * Board should be 1:1 with the component * Print should look good. Problem #2: Bad connection between p