Electronics Forum | Fri Oct 12 11:18:04 EDT 2012 | capse
company with LED light expertise; http://www.lunaraccents.com/
Electronics Forum | Wed Jun 13 01:01:10 EDT 2012 | isd_jwendell
I clean all fids with a fiberglass brush pencil so that I know there will be no rejects (it doesn't take too long). The problem is the machine lighting. My Essemtec machine uses a light ring (red LEDs) around the cam. Here's one of many documents th
Electronics Forum | Thu Jun 06 21:50:27 EDT 2002 | ianchan
Hi Mates, Here's another boggle question : does anyone know how to measure the work environment "Factory Lighting"? what is the measuring equipment to use? what is the specifications-range to measure factory Lighting? Thanks for your help.
Electronics Forum | Fri Jun 17 10:45:46 EDT 2005 | geb
What is the rule for setting the lighting level for fiducials. There is an inner and outer lighting ring, both can be set independantly on a scale of 0 to 100. It seems to be just trial and error getting it to work on different products, which is a s
Electronics Forum | Thu Oct 23 00:43:30 EDT 2008 | stanyserrao
Light Units are replaced with new if the problem of lights then it will not vision process the nozzle center measrement and resolution Jigs too.. Jig is meauring in trace mode and identifiying all leads which are fine fitch. But a 1206 resistor is
Electronics Forum | Fri Jan 31 09:04:07 EST 2020 | dekhead
Light level adjustment; direct and oblique lighting, upward and downward. Applicability depends upon which lighting modules are fitted to the camera.
Electronics Forum | Wed Dec 14 13:44:14 EST 2022 | assuredtech
Do you have the electrical schematic? The matting connector should be right there at the machine frame just under the mounting hole for the light tower. Light Towers can be an "option" on machine configurations, perhaps your machine was not configure
Electronics Forum | Thu May 27 09:26:07 EDT 2004 | Ron Daniels
The GSM can process black fiducials. To do so the fid must be programmed dark on a light background. You will need to adjust the lighting to optimize the contrast in order to be successful. If this does not work I belive that UIC offers lighting k
Electronics Forum | Fri Sep 25 13:09:42 EDT 2009 | rmitchell
Thanks to those that responded. I eliminated the light curtain problem. The metal plate the light curtain pcb bolts to was bent. I had it aligned in our machine shop and it worked properly. I forgot to mention the error was pooping up with no fee
Electronics Forum | Wed Aug 11 06:40:51 EDT 2010 | bob
If the fiducials are bad. There are 2 lights on the downward camera. The one that you can see is mainly used for bright and shiny fids....the other light is for dark/dirty fids. Turn this light on and set the other for 1 (not 0 because of a software