Electronics Forum | Tue Apr 30 10:03:31 EDT 2013 | mmjm_1099
Got it powered back on Friday.... We did check the UPS (power-supply)and indeed it was bad. So we referenced the manual and found you can bypass the UPS all together. So we just directly plugged the machine past the UPS. Well the machine is running b
Electronics Forum | Mon Apr 29 00:29:11 EDT 2013 | aemery
If you have a UPS on your machine there should be auxiliary contacts in the main breaker switch SW 1. These contacts tell the UPS if the main rotatary switch in turned to on or off. If the rotary switch was set to off the UPS knows not to turn on i
Electronics Forum | Wed Mar 27 14:56:43 EST 2002 | Claude_Couture
Can american R&D cooperate with customer and industry needs? can the education system produce world class engineers? Can freedom american style even remember what cooperation and team work is? It's a dog eat dog out there and eveybody is out to prote
Electronics Forum | Tue Oct 02 18:01:17 EDT 2018 | bnorton
The 46054001 power supply seems to have failed. Is there a published procedure for how to replace this? Hopefully one not involving disconnecting all the Dsub connectors and wrecking my body reaching it?
Electronics Forum | Mon May 02 23:24:08 EDT 2016 | ttheis
Look at "power isolators" or using transformers with AC to isolate power supplies.
Electronics Forum | Mon Jul 17 20:50:42 EDT 2017 | davef
For service related problem, contact Dave Byker at 847-913-0162
Electronics Forum | Wed Jul 12 17:05:22 EDT 2017 | rodrigo
Hi all, Our Fuji cp6 woke up with a bad power supply (ps) this morning. The ps is one of two 24vdc (Corsel P300E-24). There is one inside the cabinet and one on the door where the cpu card is. The bad one is the one inside the cabinet. So we had anot
Electronics Forum | Wed Apr 11 17:00:28 EDT 2012 | rodrigo
Hi all, Our cp4 moves rather violently (jerks) all axis when the reset sw is pressed after power up. I've got all sorts of errors after boot up: Servo amp error: D,X,Y, etc Overtravel D,X,Y, etc D clutch error, power off machine We've checked all
Electronics Forum | Tue Apr 28 09:27:53 EDT 2020 | assuredtech
On power up, push and hold the F1 key during the complete boot up, this will force the machine to boot into it's I/O menu, this allows you to verify the conditions of all of the sensors and confirm if it is waiting on an input from a sensor. Most com
Electronics Forum | Wed Mar 20 23:28:34 EST 2002 | Mahesh K.R.
I have some questions on this. What is the power rating of the power supply? In power supply where are you using the capacitor? What type of loads you connect to the power supply? If it is a simple 50Hz rectifier, There is no option. You have to us