Electronics Forum | Mon Nov 05 01:26:37 EST 2007 | jmelson
WOW! What a horror story. Well I got a Philips CSM84, having never programmed a P&P machine before, or actually ever seeing one run. I got some manuals with it that were for a different model, but they were pretty close. I had some trouble gettin
Electronics Forum | Tue Aug 18 20:57:15 EDT 2020 | dwl
Specs like beam voltage, current and focal point size are important considerations for image quality and you can spend hours going down the rabbit hole learning about them. Fundamentally, what really matters is if you can get an image clear enough to
Electronics Forum | Tue Sep 17 17:39:26 EDT 2002 | fastek
Stephen- I'm not sure since I'm having trouble understanding your post whether you are knocking my post or not. If you did intend some sort of slight than let me clarify your concerns: 1) Claude is not using an MPA-G3 so H.D. is out. 2) I've used P
Electronics Forum | Tue Jun 05 02:10:01 EDT 2018 | buckcho
Hello sir, Limits in SPI can vary a lot, also depending on finishing of the pcb. For example 170% volume on an IC (assuming is fine pitch) can be okay for ENIG, but very bad if HASL. For are I would recommend that you use either 50-130, or 60-135 max
Electronics Forum | Tue Sep 12 07:59:03 EDT 2000 | Kevin Hussey
I suggest not to. You are also adding the flux of the paste that may cause you trouble in the long run. I suggest setting up a reclaim process with you paste vendor, or someone they reccomend.
Electronics Forum | Thu Aug 20 19:30:45 EDT 2020 | aurash
Hi Guys, I 'm having trouble with a JUKI KE2060 - multiple errors on Z, X, Y axis (it seems that the problem moves around) - the error codes are E602137 E603112 any help or an electrical diagram of the machine are highly appreciated A
Electronics Forum | Tue Aug 18 22:22:43 EDT 2009 | comatose
Assuming you want to run 8 hours a day and 5 days a week, you need a sustained throughput of 2.5k components per hour. With fine pitch, futzing around, setup, etc you should really look for machines rated in the 4k to 5k per hour range. That's not sc
Electronics Forum | Mon Mar 09 14:16:37 EDT 2020 | oxygensmd
I used to work with S15/F3, was a 10 years ago. 1. Test your machine controllers and station controllers. Load the last program with actuell command. 2. You can check what happening in the SiPlace, switch the monitor to MC, let see all bootup perfec
Electronics Forum | Fri Oct 18 16:21:27 EDT 2019 | tey422
Since you have a 2nd machine, and another A12 tool, that would be a lot easier to troubleshoot by using the swap part method. Also, try to compare the A12 parameter from the 2nd machine to the "trouble" too.
Electronics Forum | Wed Sep 30 06:31:07 EDT 2015 | mervin
Thanks SWAG, I have checked the FP mode, I am aware of this. I have also worked on this machine some over 10 years ago but not as a service engineer. So I aware of the programming on the machine its just trouble shooting this particular machine is n