Electronics Forum | Wed Sep 23 10:36:01 EDT 2015 | ehess
I have found some to buy at Texas TEchnologies, texaastechnologies.com maybe they would take some off your hands.
Electronics Forum | Fri Dec 17 09:05:55 EST 2004 | adlsmt
Has anyone designed a Topaz matrix tray holder? We only need something to hold 4 trays and the Assembleon system is expensive and marginal. We can do it here but if someone else has done it would be happy to share the engineering costs to get some dr
Electronics Forum | Fri Apr 15 08:23:14 EDT 2005 | cyber_wolf
We are seeing more and more jobs come in with matrix tray parts for our mydata machines. The problem is that the largest Y wagon will only hold 3 or less trays. We have some jobs that have 10+ trays. Currently our operators cut the trays down to sma
Electronics Forum | Tue Nov 17 10:55:17 EST 2009 | tpappano
I have a CSM84VZ, so I was thinking of a device that could be placed on it's "manual tray feeder" instead of one of the 9" wide plastic matrix trays that TQFPs, etc. are supplied in. The machine would be programmed to pick parts from several single-
Electronics Forum | Thu Apr 28 11:13:33 EDT 2005 | cyber_wolf
We currently have Fuji's(IP3's included) and Mydata's in our SMT area , so training is not an issue. The reason I was thinking of an IP3 is because they seem to be available for 50K or so. We cannot afford to loose any mag positions on our Mydata's t
Electronics Forum | Thu Apr 28 01:30:07 EDT 2005 | Marv
The Tray wagon on a Mydata can be any table width you desire, a one bay holds two trays, a two bay holds five, and a three bay holds seven. The tray wagon can be removed in about a minute flat. the TEX actually only requires two slot positions to h
Electronics Forum | Thu Apr 28 09:01:21 EDT 2005 | jdengler
I agree with Stephen. The mixing of manufacturers can be a large headache if you do not have alot of people and time to get trained on the new manufacturer. The used equipment dealers won't like this, but buying a used fine pitch placer without kn
Electronics Forum | Thu Apr 28 16:12:30 EDT 2005 | stepheniii
I was going to say something about being carefull to not replace part trays with full trays and to make sure where the pickup location curently is. I think we had a tray of parts drop, then there were restrictions on who could load trays. When I work
Electronics Forum | Thu Apr 28 08:04:45 EDT 2005 | stepheniii
I like Mydata, Fuji, and Panasonic equipment. However if you have one, I"m not a fan of mixing. I have worked with the IP3 with MTU. I found it a good solid machine. The only thing at that time was the programing. I believe they have changed thi
Electronics Forum | Tue Oct 12 13:03:18 EDT 2021 | cunningham
Afternoon all, Do you use any special surface other that ESD matting when changing over matrix trays? We currently use a earthed wire trolley that we keep trays and MSD bags on and when replenishing stock its carried out on the trolley. Does anyon
