Electronics Forum | Mon Feb 14 15:14:54 EST 2000 | dean
Dek 248 / 249 (mfg'95) MPM 2000 Realignment? Are you having to insert print offsets (X.Y, theta)? If yes, your vision cubes are out of alignment. This typically happens if a "crash" occures. A "C" tool can correct this. Or are we talking abou
Electronics Forum | Tue Aug 04 10:43:48 EDT 2009 | kpm135
Thanks for the suggestions! It ended up being that a wire on the amplifier card in the lower drawer came loose and was making intermittent contact. Tightened all the wires down and the problem has gone away. Now we have a new problem. We had to repla
Electronics Forum | Wed Jul 01 05:33:29 EDT 2020 | zsoden
I recently purchased a used MPM UP2000 printer that I'm getting up and running. It's in very good condition and other than a worn out auxiliary on the main power contactor seems to be all working correctly. I've got it operating in demo/dry run mode
Electronics Forum | Tue Sep 29 10:10:34 EDT 2015 | swag
We used to have a UP3000. Long time ago so I'm rusty but isn't there a setting for fid correction that you an program to occur after each board or after 5, 10, etc.? I thought I remembered doing offsets on ours as the camera was a little wacky (old
Electronics Forum | Tue Mar 25 08:35:49 EST 2003 | pjc
AccuFlex is the replacement for UltraPrint 1500. UP1500 is going obsolete. AccuFlex was desgigned for fast setup and changeovers and takes some tasks away from the operator. The UltraPrint 2000 was designed for high production, even though many users
Electronics Forum | Sat Sep 26 03:21:58 EDT 2015 | aemery
Mervin, Love these machines, Speedline built about 3500 of them so I have lots to fix. Most issues come down to incorrect use or poor adjustment and alignment. Your description is a little vague, you didn't mention which direction the prints are of
Electronics Forum | Thu Feb 15 13:46:16 EST 2018 | aemery
Griinder, Maybe it's me, but I think what you might be saying here is that you see a reflected image of the PCB or Stencil when you and teaching the fiducials and it is interfering with the teaching routine, is that correct? If this is true it is c