Electronics Forum | Tue Jul 14 13:20:13 EDT 2020 | tomdegas
I have a MY12 running TPS 2.8.1 and I need to know how to calibrate the X wagon Visin system. The machine is off in the Y direction after I removed and replaced the camera.
Electronics Forum | Tue Feb 03 12:39:16 EST 2009 | markhoch
Not sure what your job quantity is, or how many total parts you have to place, but we've had similar issues in the past trying to place domed LEDs. We had better luck cutting the tape into 25 or 50 piece strips and using double-sided tape to put the
Electronics Forum | Mon Jun 11 15:43:38 EDT 2012 | williamaxler
We are going to be moving some equipment around and our MY15 and TP11 will not fit through the door unless we take of the Y wagon. Does anyone know how to do this? If so could you please share with me.
Electronics Forum | Tue Jun 12 14:28:17 EDT 2012 | dontfeedphils
It should be pretty straight forward while taking it apart, just make sure you label things, and be ready to run through every one of the calibrations after it's put back together. Oh, and have fun Bill!
Electronics Forum | Thu Jul 23 09:15:18 EDT 2015 | padawanlinuxero
mmmmm.... what type of y wagon you have on the mydata?
Electronics Forum | Wed Jan 29 13:01:04 EST 2014 | tech1
Back when the Linear Y wagons first came out Mydata had problem with the original Y amplifier and were swapping out the complete box for customers who had problems. There was also a problem with the encoder that resulted in the same type of errors yo
Electronics Forum | Thu Jun 14 00:10:18 EDT 2012 | tech1
Most of it depends upon the type of Y wagon you have. if they are internal conveyors you need to remove the covers from the operator side. There are 3 screws holding the Y wagon down, 2 of them are hex screws and the one in front is an allen head. W
Electronics Forum | Thu Jun 26 06:14:16 EDT 2014 | allgood
We find sticking tape down to the tray wagon or to a base plate is Ok but not very repeatable - when you peel the empty off and stiock a new on e down you have to relocate it every time so some way of holding the strip in a repeatable way is better.
Electronics Forum | Fri Apr 15 08:23:14 EDT 2005 | cyber_wolf
We are seeing more and more jobs come in with matrix tray parts for our mydata machines. The problem is that the largest Y wagon will only hold 3 or less trays. We have some jobs that have 10+ trays. Currently our operators cut the trays down to sma
Electronics Forum | Sun Jan 24 20:11:45 EST 2010 | wmeliane
Hi I would like to get feedback on which of the following 2 machines to buy: -option 1: My100 with single Midas head -option 2: D1S with single P&P head I have experience with the Siemens D series. However I have no real experience with Mydata... Is