Electronics Forum | Sun Nov 10 05:40:27 EST 2019 | compit
It turned out that only SF heads support "fine" mode, while FNC does not. Probably because above the FNC nozzle there is a "circle" rotating the nozzles, and in fine mode it can interfere with the reflection of the camera light - the element is lower
Electronics Forum | Sat Apr 23 11:30:50 EDT 2005 | Haran
What are the types of Nexlev Connectors available?What are the differences between them.I will be running this component very soon.
Electronics Forum | Sun May 07 19:29:52 EDT 2006 | Dhanish
I am seeing high solder bridging for Nexlev Connector.Can someone advise what are the factors causing Solder Brdiging for Nexlev issues.
Electronics Forum | Wed Oct 29 23:07:42 EDT 2014 | rajz
Help Needed. I face a solder bridging issue on solder mask define pad at edge only for nexlev connector . The pad design such as smd at four corner only. The bridging happen on signal to ground pin only. Current stencil we use 22 round with 6 mils s
Electronics Forum | Thu Oct 30 23:46:20 EDT 2014 | beilimanu
What's the software you are using? Modify it manually. It should not be difficult.
Electronics Forum | Tue May 09 22:57:58 EDT 2006 | davef
The NexLev connector is built in a stripline construction, providing a continuous ground plane for each signal contact. The connectors come as tenrow connectors with 100, 200, or 300 positions at possible stacking heights from 10 mm to 30 mm. Technic
Electronics Forum | Tue Sep 13 20:59:26 EDT 2005 | davef
http://www.teradyne.com/prods/tcs/products/connectors/mezzanine/nexlev/modconfig.html
Electronics Forum | Fri Jul 28 14:34:13 EDT 2000 | Gary Simbulan
Belive it or not, these boards were run through a Centech batch mode Vapor Phase machine. Single stage top side IR preheat. Vapor temp 218 C. Solder paste is an SN62 RMA.The boards were FR4 8 layer w/ solder mask, fairly conventional as might be e
Electronics Forum | Wed Jan 15 07:28:15 EST 2003 | Jean-Philippe
Its not really an electromagnetic device, its just a feeder for connectors.
Electronics Forum | Wed Feb 16 16:41:31 EST 2005 | Mrduckmann2000
Pallets will not work in this case because the wonderful designers put 0402's between the legs and all around the legs of the thru-hole connectors. There are 18 thru-hole connectors on this board and 200 - 0402's around them. The 0603's that are al
