Electronics Forum | Fri Nov 16 09:28:08 EST 2018 | robl
If you are gang picking from 6 reels in a row for the same part, so the head goes down twice for 12 components, which is easily done on the boards you have previously described, you should see 18K+ per hour with decent panelisation. On an LED panel
Electronics Forum | Thu Aug 31 04:25:03 EDT 2000 | Chris May
Dougie, If you have square, rectangular etc; shaped PCB's maybe you could have routing between circuits. "V" shaped grooves top and bottom. I found this extremely good especially if the assemblies are wave soldered. No gaps for flowing up and over.
Electronics Forum | Mon Jul 03 14:47:35 EDT 2000 | Ashok Dhawan
In a typical flowline assembly of circuit boards, what are the different methods used for tracking WIP ? I can think of : 1. travel cards - not suitable for panelised boards 2. Marking ID# on board at various operations while board is being built.
Electronics Forum | Fri Sep 24 09:57:54 EDT 1999 | Boca
| | Is there a standard rule/guide for the orientation of pcb's in a panel for panelised board (specially for routed panel). | | i often get this question from peeps here and i kept telling them that it depends on how it affects the process. | | than
Electronics Forum | Thu Jun 26 03:27:35 EDT 2003 | loz
We currently have a requirement to build flexi circuits and mount two 40 way, 20 thou connectors at each end. The flexi pcb's arrived in singlulated format. Ideally we would like to have the circuits panelised for machine building as hand placing the
Electronics Forum | Mon Feb 27 06:18:32 EST 2012 | sarason
I am just releasing Version 1.0.0.9 Beta Release Added feeder swapping. minor fix in Mydata TP Sys 2.7 Added more Juki 2000 and 700 series and Yamaha YP/YG machines, more Panasonic machines. Updated Options tab, User interface cleansing Added Check
Electronics Forum | Thu Sep 01 11:17:52 EDT 2005 | chunks
There are many rules, but balance is the key. It all depends on your processes, type of equipment you plan to run the panel through, as well as the type of components going onto the board. If your single up circuit has 6 thru-hole caps, 5 connector
Electronics Forum | Tue Sep 02 18:49:05 EDT 2008 | jlawson
Juki machines generally are great machines for reliablity and maintaining overall accuracy as they have full linear (mag-scales) encoders on XY axis and self calibration features. Laser centering has its pros and cons - mostly pros, but can have iss
