Electronics Forum | Mon Mar 23 13:21:32 EDT 2009 | joeherz
We have recently installed a selective solder machine that is running SN100C alloy. Based on the fact that the pot maintenance is done inside the equipment where adequate ventilation is present and we aren't dealing with lead, I don't see the need f
Electronics Forum | Fri Nov 14 10:40:35 EST 2014 | eniac
I use a two machines from EBSO, Germany. It's a machines with PCB carrier, so, solder pot is fixed. I'm fully satisfied with this equipment, but I use only wettable nozzles. If you would like to buy a new machine, not in used condition, EBSO will be
Electronics Forum | Thu Jun 30 18:40:06 EDT 2005 | KEN
What your asking has many variables. 1. Material: SS vs. Cast Iron. Iron is thicker. Which SS? 316, 316L 2. Pump speeds, turbulence, hours of operation directly affect equipment life. 3. Things like scraping the pots, the tunnels, impelle
Electronics Forum | Thu Jul 22 22:18:12 EDT 2004 | davef
Notes from an AIM No-Lead Presentation ... Wave Soldering * May require a higher pot temperature than tin/lead: 255-265*C * May require a change in liquid fluxes to compensate for the poor wetting of some alloys and high thermal stresses of the wave
Electronics Forum | Fri Feb 09 10:35:19 EST 2007 | sundaram
Hello, Changing from Pb to Pb free solder pot takes about 10 hours. is there any easy way to reduce the timing for this process with additional or new equipment.
Electronics Forum | Thu Feb 16 14:02:28 EST 2012 | joeherz
We have been using a selective solder system for all of our automated LF through hole processing to this point. It has served us well but volumes are increasing and we are getting ready to pull the trigger on a full size wave machine to handle the l
Electronics Forum | Wed Sep 28 03:45:55 EDT 2005 | aj
your supplier should be able to provide you with all the neccesary equipment.
Electronics Forum | Thu Jan 14 10:59:00 EST 2016 | davef
Don't forget to post your equipment "wants" in the SMTnet Equipment Mart http://www.smtnet.com/parts/ ... ... used equipment-types are more likely to look there than the Forum
Electronics Forum | Mon Aug 09 11:34:25 EDT 2004 | Woodsmt
I am looking for data / info on how flux may contaminate the solder in a Wave. I have a customer who requires a no clean process. Our wave is equipped with 2 separate fluxing systems and I would like to use OA in one and the No Clean in the other. Th
Electronics Forum | Wed Aug 06 04:11:56 EDT 2008 | chrispy1963
GR@ICS, can you be more specific about your up in the Ersa machine please? Nozzle size, pump rate (%), and is your machine equipped with monitors on the solder pots? We have the same machine it sounds like, however we run Pb-Free in both pots. I
World Equipment Source has over 20 years experience in Electronic Assembly Equipment. We will resell your equipment by utilizing our global market of associates.
Equipment Dealer / Broker / Auctions
8655 Production Ave Suite B
San Diego, CA USA
Phone: 858-693-1991
