Electronics Forum | Mon Jan 10 16:58:48 EST 2011 | piter
Hi Ripal it seems that you have problem with compatibility of alloy and quality of solder balls. First check solder alloy form BGA balls what is it?(SAC105,SAC305, etc.) what type of solder paste you use?? third thing is what type of finishing you h
Electronics Forum | Wed Jul 01 13:17:39 EDT 2015 | davef
Cheryl Tulkoff and Randy Schueller do a good job summarizing the thinks on pad cratering here: http://www.smta.org/chapters/files/uppermidwest_padcratering.pdf Potential Mitigations to Pad Cratering * Board Redesign * Solder mask defined vs. non-s
Electronics Forum | Mon May 29 23:39:11 EDT 2006 | Faizal
Can anyone advice me on the effect of SN100C wave solder on SAC305 hasl board? I suppose the silver content on the hasl pcb would leech(contaminate) into solder pot.? Would it affect the surface bonding between copper pad and the solder.?
Electronics Forum | Wed Jan 17 08:27:38 EST 2007 | Bob R.
Is there a standard (IPC, JEDEC, JEITA, etc) covering the tolerances on percentages of Sn, Ag, and Cu in SAC305? I'd also be interested if there are standard allowable amounts of other contaminants. I couldn't turn up anything in a search of the IP
Electronics Forum | Tue Nov 24 10:43:06 EST 2009 | isd_jwendell
I have used SnBi from Alpha, and it worked well. The only issue I found is that you cannot have ANY Pb contamination.
Electronics Forum | Tue Oct 03 17:04:07 EDT 2006 | cuculi54986@yahoo.com
Glenn, What alloy are you using for Pb-free HASL? You say tin copper nickel, but is it SN100C? Against manufacturing engineering's recommendation, my company specified simply "Pb-free HASL" as the finish for our Pb-free PCBs. One of our suppliers
Electronics Forum | Wed Apr 28 06:26:15 EDT 2021 | jeremy_leaf
@Evtimov I can't use flux as the components being soldered can't cope with any contamination whatsoever. Even an ultra low solids no-clean flux will be too much. I also can't clean the boards after soldering due to any residual contamination from the
Electronics Forum | Mon Mar 17 04:31:52 EDT 2008 | d0min0
Hello, tried searching the SMTnet archives, but not yet a clear answer - maybe there is not a one yet ? ;) last discussion I found is few years old so maybe there is a fresh view on that? Q: we want to prove that our proces is "clean" we use SAC30
Electronics Forum | Tue Apr 13 11:41:18 EDT 2021 | jeremy_leaf
I have a SAC305 preform with which I am attempting to bond a gold coated component to an ENIG coated PCB pad. I've specified 2 microinches of gold for the ENIG. It worked previously but now with a new batch of boards, I am having an issue where the p
Electronics Forum | Tue Feb 19 10:47:47 EST 2019 | rgduval
I'm with Steve. Check the datasheet, and make sure that the terminations are meant for solder application, and not conductive epoxy. I had that happen a year or so ago with an MLCC. Drove us nuts for two days (not to mention the significant rework