Electronics Forum | Wed Apr 10 21:47:55 EDT 2024 | ddfreeze
have swapped 2 different boards, can try switching the dram sticks, or ordering new ones. also the cmos battery on the motrola communications battery was dead, put a new one in, was wondering if there was a cmos reset/ jumper?
Electronics Forum | Mon Apr 29 00:29:11 EDT 2013 | aemery
If you have a UPS on your machine there should be auxiliary contacts in the main breaker switch SW 1. These contacts tell the UPS if the main rotatary switch in turned to on or off. If the rotary switch was set to off the UPS knows not to turn on i
Electronics Forum | Fri Apr 26 15:00:44 EDT 2013 | leemeyer
This is what the manual says about this message : Power Failure Detected A main power failure occurred and the machine is being powered by the UPS. All heaters are shut off immediately ad the conveyor clears all boards If main power is not restored w
Electronics Forum | Tue Feb 25 03:32:58 EST 2020 | bukas
hello guys, I got a problem with MAIN START switch on Samsung CP45FV NEO. The switch itself works, and it activates contactors #1-1 #1-2 and #3 but after pressing READY button there is en error msg reporting that MAIN START has not been pressed. Alre
Electronics Forum | Thu Apr 30 02:09:50 EDT 2020 | bukas
Thank you for you reply yernie. This forum is about industrial electronics assembly machines and technologies and not about smartphones. btw, the problem was IF board if anyone was wondering.
Electronics Forum | Wed Apr 29 17:46:08 EDT 2020 | yernie
Maybe your phone had factory defect, I think if you will go to the flagman store they will offer you a solution or even exchange your defected phone to the new one. I have tried the same when I lived in my property in France and consultant suggested
Electronics Forum | Tue Aug 10 20:34:44 EDT 2021 | jamesatqkits
Hi Could you explain what the IF board is? I am getting a 1002 ALARM occurred in MIR axis, i cannot figure out what its trying to tell me. I have never been able to make this machine work. Would you have any ideas? Thank you have a great day. I was r
Electronics Forum | Wed Aug 11 06:39:29 EDT 2021 | bukas
Hi James, make sure you have healthy HDD and disk image. These machines are a bit prone to data corruption after all these years and it can often look like hardware problem. I had a problem with mirror axis that turned out to be corrupted data. Ther
Electronics Forum | Thu Aug 12 15:39:36 EDT 2021 | bukas
it can be cable. can you swap cables with next driver? also swap cables on head. if same driver shows error you need new driver probably. if new driver shows error then its cables or motor. check documentation to see what motor it drives. you cant sw
Electronics Forum | Thu Aug 12 06:46:35 EDT 2021 | bukas
there is no, error $0022 in technical reference. is the error you are getting a EMER level? if so there is probably a safety sensor or switch that is causing this error. $0021 is related to door switch so I would go from there. do you have technical
