Electronics Forum | Mon Apr 26 08:15:37 EDT 2004 | pjc
MPM uses a one-print-Mylar system, as do other printer mfrs. In this system there is a Mylar sheet attached to a frame that is secured over the printer table with the board on it. You print onto the Mylar. The table X-Y-theta manual adjustments are u
Electronics Forum | Thu Apr 29 10:49:05 EDT 2004 | pjc
Yes, using an illuminated magnifing glass helps. How well your board fixuring is on the table will effect print alignment on other boards loaded. 0.5mm & 0.4mm will require very good fixuring, like you can get with tooling pins if the board has non-p
Electronics Forum | Fri Jul 06 18:48:28 EDT 2012 | saju86ece
Hi, I have one query about cleaning rate for screen printing. In screen printing process, for cleaning process generally we will give up to 5(cleaning rate)depend upon the product. I need the cleaning rate specification for the above said. Need you
Electronics Forum | Thu Apr 22 14:31:03 EDT 2004 | northern
I have used both the MPM and DEK. The MPM's look nicer and have a few fancy features but the DEK printed more consistent time and time again. I believe you spend a lot more money for MPM's when DEK will give you what you need.
Electronics Forum | Thu Oct 28 15:34:14 EDT 2004 | Kuru
Hi Ken, With a lots of help from Harry at Value machine sales I have the print working since June. Thanks for checking
Electronics Forum | Thu Apr 29 13:27:36 EDT 2004 | Kirk
Is it possible to put PCB to the screen printer with vision and on the board put sheet of paper then make print on the paper and it is the reference then i teach vision for example fine pitch aperture then remove paper and align PCB? We have semi-a
Electronics Forum | Mon Dec 29 21:22:48 EST 2003 | Dean
SPM-AV is a very versitle printer. I have one that is currently handling a 23.5 X 16.1 inch board. The print stroke has been increased to 21.3 icnhes. Again, very flexible machine. We may have two for sale if interested. Email me at idwitheld@com
Electronics Forum | Tue Apr 27 14:54:26 EDT 2004 | Kirk
reduction apertures in stencil and question how find center?. I thought that vision start playing important role at the beginning for the first PCB, help set precisely printing process. You gave tip to work without Mylar. Ok but again how you set ste
Electronics Forum | Thu Sep 03 01:14:40 EDT 2009 | sachu_70
Yes, it is important to ensure blade pressure over stencil is uniformly distributed across the entire length of blade. Such is possible only if the stencil is firmly supported from below, which during printing is done by the presence of the PCB itsel
Electronics Forum | Fri Nov 05 07:14:04 EDT 2021 | oxygensmd
The question is that what do you want? An automatic/semi-automatic machine or a hand-prototyping printer? Using metal-sheet or complete (framed) stencil? Manual printing: For example, Eurocircuit's eC-stencil is pretty nice or there are cheap hand-s
