Electronics Forum | Tue Feb 03 14:19:29 EST 2009 | grics
I would agree if you have a board to setup the process. But sometimes this doesn't work... If for some reason if the customers AVL has a Lead Free BGA and I am running Leaded paste (yes this really happens!), you will need to run hotter to get your
Electronics Forum | Tue Mar 09 19:53:22 EST 2021 | omarsmt
There are software companies out there who can help predict when SMT machines will falter or help identify line utilisation losses. They use sensors as and when required with certain machines. Are there companies also looking to do this? What has th
Electronics Forum | Wed Sep 25 12:42:30 EDT 2013 | Chris
You have to make sure the tape is covering the holes, this is where the sensor reads the tape.
Electronics Forum | Tue Aug 01 18:12:18 EDT 2006 | SWAG
Check to make sure the platen and the camera are meeting the sensors that tell the machine they are "parked". Find these sensors and flag them. Look for indication they are working in the input screen. Also, make sure the sensor flags can go into
Electronics Forum | Wed Mar 13 14:17:03 EST 2002 | dougt
Are these sensors the reflective type? Maybe when the board is unclamped and it goes over the sensor it is seen, and then when it is clamped (raised) it is now out of the range the sensor was set for. That should be easy to adjust. A problem I've
Electronics Forum | Mon Sep 16 18:45:26 EDT 2013 | mbb
Hello, We have currently Pick and place machine (Panasonic) with tape splicing joint sensor,the issue is, that once we want to change tape splicing for costs reason, the sensors don't detect any tape splicing .Is there anyone from Panasonic to expl
Electronics Forum | Thu Apr 28 00:19:52 EDT 2016 | ttheis
I'm not personally familiar with the 265 but it sounds like the machine's board stop actuator is not retracting or a sensor that detects that actuator position is stuck (probably a reed switch.) If your stop is not retracted, then the sensor is telli
Electronics Forum | Thu Aug 22 04:08:17 EDT 2002 | Jason Baldwin
Symptom: Board Stuck on Print Conveyor error messages. Cause: Board not flagging the camera sensor. Remedy: Check the following items: � Check the camera sensor can see the board underneath. � Check the camera sensor calibration (in Tools, Camera Re
Electronics Forum | Thu May 07 08:12:06 EDT 2009 | milroy
Hi I recommend you to check the exhaust sensor, the ERSA EWS500F is sensing the exhaust before it activates the fluxer. If the exhaust is not working then machine does not start to avoid the sprayed flux emit to the work environment. There is a sens
Electronics Forum | Wed May 04 15:17:18 EDT 2005 | cuculi54986@yahoo.com
The Pananame for the thickness sensor is the line sensor.