Electronics Forum | Tue Dec 02 02:47:54 EST 2008 | act_smt
Thanks for the resources. I plan on contacting them to get some answers. I hope this all works out for us & can help others someday should they come accross similar issues too. Thanks again.
Electronics Forum | Tue Jan 29 17:11:32 EST 2019 | slthomas
Your product is Class 3, correct? Otherwise, a clearly wetted connection is all you need.
Electronics Forum | Wed Jan 30 03:01:39 EST 2019 | robl
You could use a stepped stencil around the parts you're having issues with to add a greater paste deposit to them and not the rest, or slightly elongate the apertures and overprint, but this may lead to solder balling.
Electronics Forum | Wed Jan 30 13:17:22 EST 2019 | slthomas
In addition to robl's suggestions, I would look at the footprint on the board to make sure it meets the recommended dimensions. Abnormal layouts, particularly when pads extend under the component too far, can be problematic both by lifting the part
Electronics Forum | Mon Sep 06 20:22:03 EDT 1999 | Devon Richards
Please excuse my ignorance, I am a brand new EET student. Can someone please tell me how to identify smt components on a pcb? ie: which is a resistor, capacitor etc, and what do those tiny numbers mean? My digital prof. did not know!!! Thanks in a
Electronics Forum | Fri Nov 14 07:56:49 EST 2008 | davef
Section 9 of J-STD-001 gives you what you need. Further: * Flattened [coined] lead: http://workmanship.nasa.gov/lib/insp/2%20books/links/sections/files/711.pdf * Flat lug lead: Look for the Package Designator �LT� on page 7 of http://www.allegromicr
Electronics Forum | Sun Sep 27 10:42:35 EDT 1998 | l atch
I'm looking for a chart that will help me identify smt resistors and capacitors. I have figured out a few on my own. a resistor with the numbers 510 printed on it was a 51 ohm resistor. numbers 221 was a 220 ohm resistor. numbers 102 was a 1k resis
Electronics Forum | Mon Sep 06 22:24:51 EDT 1999 | KEVIN SIMPSON
| Please excuse my ignorance, I am a brand new EET student. Can | someone please tell me how to identify smt components on a pcb? | ie: which is a resistor, capacitor etc, and what do those tiny | numbers mean? My digital prof. did not know!!! Tha
Electronics Forum | Fri Nov 14 02:18:04 EST 2008 | act_smt
What is the spec or true classification for the leads for an Electrolytic capacitor? Is it a : 1)Flattened coined lead??? or 2)Flat Lug Lead??? There is some confusion as to how we should be inspecting & accepting the toe overhang on these per IP
Electronics Forum | Tue Jan 29 08:21:50 EST 2019 | electronics101
Hi All, Can someone please help, I have a number of tall surface mount components that according to IPC 610 (8.2.2.3) are a fail due to the end termination not wetting at least 0.5mm + solder height. The components are very well soldered but the sol
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, China
Phone: 0755-33578694