Electronics Forum | Wed Jun 23 10:21:25 EDT 1999 | Chrys Shea
| I am looking to apply 10-15�m of a conductive material that will withstand 280�C. Our product consists of an alumina substrate sputtered with NiCr (2000�) and Copper (2000�) and 15-60 �m of electroplated copper (all metals patterned on the substra
Electronics Forum | Mon May 17 13:34:22 EDT 2010 | davef
If it's not adhesive, try an ESD-type ionizer. The objective of an ionizer is to eliminate surface charge on insulators and on isolated/ungrounded conductors. Practically speaking, the action of an ionizer is to drive the voltage on the surface of a
Electronics Forum | Wed Jan 13 04:27:00 EST 2016 | crystalpcb
Hi Here is our factory production capability: Shenze Electronic PCB Specification Layer Count 1 to 35 Layers Material Brand Shengyi,KB,GRACE,ISOLA,Rogers,Taconic,ARLLON,Bergquist Base Material FR-4（TG135,TG150,TG170,TG180），Halogen Free FR-4，Ceramic
Electronics Forum | Mon Oct 06 12:37:18 EDT 2003 | ramanandkini
It was a nice discussion. What I did here was a thermal shock test 1 hour@ +90 deg.c and immediately 1 hour @ -40 deg.c. The second test I did was a high humudity test for a week. After each test, I carried out a peel test with scotch tape. Those bo
Electronics Forum | Wed Jul 16 18:46:46 EDT 2008 | mariss
emti, Thank you for the reply but I'm looking for a reasonable quality pcb mfg. We do SMT and thru-hole in house (3 Juki KE-750L machines) of our product. My problem is with the bare boards: holes poorly registered with top copper, solder masks mis
Electronics Forum | Fri Mar 24 18:07:25 EST 2006 | Chris
Flash gold is just thin gold plating over electroless nickel or electrolytic nickel. Flash gold is electrolytic gold where the panel is connected to a plating rectifier and current causes the plating process to occur. Gold thickness is controlled b
Electronics Forum | Thu Aug 10 10:13:11 EDT 2006 | pjc
I have never seen any industry standards for setting up an SMT assembly facility, but I�ll offer some basic advise. An ideal SMT assembly facility is one that is clean and well lit and has environmental controls to maintain temp and RH. Temp of 24C (
Electronics Forum | Thu Apr 17 10:44:24 EDT 2008 | rculpepp
I'd suspect contamination also, possibly from the board supplier. Sr. Tech's post mentioned what looks like a blister on the board, in the upper right of the Q19 photo. This could very well be a contaminate from the PWB fab shop. I've seen similar pr
Electronics Forum | Mon Sep 16 12:56:56 EDT 2002 | dragonslayr
simon- davef is on the right track. 1st year electronics courses teaches us that you should always check the power supply first. In this case, the power supply in question is not your power source but the regulated power within the unit. I suspect o
Electronics Forum | Mon Apr 25 11:24:31 EDT 2005 | Daan Terstegge
I have a question about inspection, touch-up, and how far you need to go to get a product that meets the required IPC-spec. According to some reports (i.e. "New Study Reveals Component Defect Levels" by Stig Oresjo of Agilent) the average defect leve
We are please to introduce ourself- ，who is one of the SMT solution provider for Global customers, we can supply Automatic Insertion machines spare parts, SMT spare parts, (including feeder ,Nozzle,PCB
Manufacturer / Consultant / Service Provider
The third floor,No 3, Yanghua Road,Huangdong Village ,Fengguang town
Dongguan, China
Phone: zoey@jinchensmt.com
