Electronics Forum | Fri Feb 12 14:36:53 EST 2010 | davef
Get a lot and serial number tracking module for your ERP
Electronics Forum | Tue Apr 19 06:08:16 EDT 2011 | babithak
I saw zigzag tracks on some PCB layouts. What is the actual requirement and advantage of having this kind of tracks?
Electronics Forum | Thu Nov 27 16:55:31 EST 2003 | johnwnz
Hi Folks, trying to track down if there is a std for the max number of track repairs that you can don on a PCB. IPC 610 gives me an indication of what is acceptable in term's of the amount of damage I can have on a track before it's a fail however n
Electronics Forum | Thu Aug 26 07:30:08 EDT 1999 | Robert Meston
Help I have just received some PCBs with external tracks entering SMD pads at all angles, tangents + 45 degs etc. Where can I obtain information as to how tracks should enter SMD pads.? I have looked at several IPC books and got some minor info but
Electronics Forum | Thu Sep 06 01:12:43 EDT 2001 | Dreamsniper
Hi, What's the maximum track width that is allowed to be attached to a 0805 component land pattern. I have a 70 mil x 45 mil Land for my 0805 and is attached to a 50 mil wide track with a length of 300 mil to 1500 mil. Components affected are mostly
Electronics Forum | Mon Jul 22 11:41:11 EDT 2002 | Claude_Couture
The trick is to put a serial number on each feeder and use a maintenance tracking software. There are commercial software out there that do just that. Some even use the barcodes to track the location of the feeders, so you know which machine it is on
Electronics Forum | Mon May 05 22:24:17 EDT 2003 | jlipton
We are investigating a system, using 2-D matrix code, that will identify and track every PCB throughout our factory, starting from bare board. As a low-medium volume manufacturer, would labels or laser marking be more cost-effective? How difficult is
Electronics Forum | Mon Aug 11 07:16:38 EDT 2003 | cyber_wolf
Hi, Does anybody know of a company that sells a feeder/machine maint. tracking system.I would like to barcode all of our machines/feeders to track maint. We already have a barcode scanner and printer to do all of our SMT parts. Maybe there is some w
Electronics Forum | Thu Sep 02 11:00:14 EDT 2004 | diderry
Hi Bryan, I hope you dont mind a quick sales pitch here. We have developed a system called HumiTel which is used to manage MSDs. Its not the paper tracking system you mentioned; it comes in two flavours, a hardware tracking device and a software whic
Electronics Forum | Fri Jul 29 18:00:31 EDT 2011 | daveatdt
There should be a "Tracking" button at the bottom of the screen that you can just tab over to, then press the green start button. I have not worked with the 730, but it is that way on our 740, 750, and 760 machines. Alternatively, you can move the cu