Electronics Forum | Mon Jul 01 15:29:56 EDT 2002 | pjc
I have used a heat gun and found it effective at burning off these residues. Also, check the fine SMTnet archives.
Electronics Forum | Mon Jul 01 22:39:28 EDT 2002 | davef
Now, don't be so fast to give-up on those guys. Many saponifier suppliers offer cleaning services for situations like yours. Contact: * Kyzen * Envirosense I seem to remember a similar thread, in the past six months, where our old friend Mike Kon
Electronics Forum | Mon Jul 01 20:44:17 EDT 2002 | davef
Actually, the white res were caused by the water carrier in your Lonco 23F reacting with the res from the nc flux used to solder the component in place. Comments are: * Some nc flux res are cleanable, some are not. Your supplier [Alpha?] can probab
Electronics Forum | Sun Apr 05 18:59:15 EDT 1998 | Graham Naisbitt
Jaqueline There are so many variables in the electronic assembly manufacturing process involving more than 12 different chemistries, that it is impossible to easily identify and determine the nature and reason of such residues. GEC Hirst Research in
Electronics Forum | Fri Apr 03 08:22:36 EST 1998 | Scott Cook
| At this moment in time we are using water soluble solder paste on our PCBs these are cleaned using water only, agitated with ultrasonics. After drying a white/grey residue is left around solder joints. Reflow profile is fine and a reliable wash pro
Electronics Forum | Tue Oct 31 21:49:38 EST 2006 | davef
First, we assume the white residue is only on the connector and not on other components. That would imply that either: * White stuff was on the connector when it came in-house from your supplier. [Confirm this theory by baking some connectors from
Electronics Forum | Sun Oct 29 22:41:29 EST 2006 | hanocete
We have a current problem on our packages after we bake it for 24 hrs prior BGA rework. Flux or white residues found on the connector leads and terminals that cause not contact problems during mating. Could you help us how to clean the fluxes properl
Electronics Forum | Mon Oct 30 21:43:08 EST 2006 | davef
So, after the repair of a BGA, you notice white reside on a nearby connector. Correct? [Sorry we're so dense. Long day.] Tell us about: * Flux class used in repair * Flux class used in original assembly Why are you baking the assembly after repair
Electronics Forum | Mon Oct 30 20:24:35 EST 2006 | davef
As we understand it, you: * Get some nice BGA from your supplier * Find BGA to be packaged properly * Bake the BGA for 24 hours at [what temperature?] to reduce the potntial for damaging moisture sensitive components during following processes * Remo
Electronics Forum | Fri Jan 31 03:39:26 EST 2003 | NP
EC7M is clean up solvent that can help to prevent white residue problem. It made from Orange shield. Good luck
