Electronics Forum | Wed Aug 02 14:54:15 EDT 2006 | chrisgriffin
I mean if you are using the same stencil for the top and bottom of a board. Thanks to everyone for the help. From what I gather, it will work when the stencil cut-outs are offset from center in the Y-axis. Doesn't work too good in the x-axis, beca
Electronics Forum | Wed May 25 19:25:24 EDT 2022 | jojoled
Thanks "Spoiltforchoice" for Informations, I have found allready a Chinese company which has such machines, just wanted to check other options from other countries too. I know it is from other end of linear process, but from my point of view (plus wh
Electronics Forum | Wed Oct 26 10:21:28 EDT 2005 | russ
We are also experiencing problems with this thick stiff paper tape. Our problem is the strength of the spring that supports the tape at its pick position. After a while it just pushes it down because the tape exit wants to bend the tape too sharply
Electronics Forum | Wed Sep 12 09:47:29 EDT 2018 | junkeymonkey246
Hello everyone, I have 3 Contact Systems CS-400B's 2 of which need arepair and the last needs servicing and 2 CS-400E's which need repair. These machines have been sitting idle for years are are in need of repair. I was in touch with the manufact
Electronics Forum | Tue Aug 01 19:52:19 EDT 2006 | darby
If your frame size is 730mm x 730mm then you can't move it left or right. If it smaller than that then the frame adapter will give you more leeway. I am not too sure by what you mean by "If I had a 6" board, and a stencil with cut-outs for both side
Electronics Forum | Thu Nov 07 14:44:52 EST 2019 | bandjwet
We have been in contact with HK Yush out of Shen Zhen that is marketing an SMT metal laser cutting machine similar to the LPKF 6060 series (IA Tech SC-6060). Apparently there are no customers in the US. Does anyone in SE Asia have experience with th
Electronics Forum | Mon Apr 26 21:29:34 EDT 1999 | Dave F
| Hey - remember the evaluation of VOC-Free fluxes that I promised a couple of months ago? well, I finally scrounged up the time to remove the propreitary (board name and number) info from the report. So it's ready. I posted it in the SMTnet libra
Electronics Forum | Tue Aug 19 15:27:50 EDT 2008 | realchunks
I could break it down for you, but to most - being Asian is just that, being Asian. I would say I am 75% Chinese and 25% percent "other". Breaking down that part would take too long, so my picture will have to do. The point I was making was I am n
Electronics Forum | Tue Aug 23 03:29:37 EDT 2022 | samhe
I received a buck-boost DCDC board with an optical sensor from NextPCB, so I mounted the components and measured the efficiency. Table of contents Board received from NextPCB Solder paste printing Mounting of parts Reflow operation check Attaching
Electronics Forum | Tue Jul 21 14:33:43 EDT 2015 | tsvetan
Setting aside the shameless advertisement :) Can you define what is high speed? The real high speed P&P machines are done by Sony, Juki, Samsung, Siemens, Fuji. The Chinese p&p machines I saw are with low speed (less 30 000 cph by ISO) poor design,
.gif)
