Electronics Forum | Wed Apr 11 17:00:28 EDT 2012 | rodrigo
Hi all, Our cp4 moves rather violently (jerks) all axis when the reset sw is pressed after power up. I've got all sorts of errors after boot up: Servo amp error: D,X,Y, etc Overtravel D,X,Y, etc D clutch error, power off machine We've checked all
Electronics Forum | Fri Feb 25 16:34:53 EST 2005 | jimmyb
In your PDs you must specify a single nozzle size. Meaning don't assume that entering nozzle size max=1.3 and nozzle size min=1.3 forces the machine to use a 1.3. Nozzle size min is not used in the CP6 software (it only uses nozzle size max), there
Electronics Forum | Thu Feb 24 12:08:15 EST 2005 | siverts
Checked the condition of your nozzles? Vacuum ok? Dummy part picked from the same feeder position? Dummy part picked from the very same feeder? How often does this problem occur? How many dummys did you pick for comparison? Sometimes a feeder calibr
Electronics Forum | Thu Sep 18 15:26:04 EDT 2008 | ismir
Dear Hegemon, I'm very grateful for your help. There is one more thing that I'd like to discuss with you. I'd like to know if there is any "verification board" or something like that to check if you really did a good job. At the company where I wo
Electronics Forum | Tue Sep 26 14:22:25 EDT 2000 | Donna Poire
I'm trying get some help/advice/consulting on using a Contact 3SX Pick and Place machine. We've been using the machine for several months and have been successful placing parts (nothing smaller than 0805's so far). Recently, we are experiencing err
Electronics Forum | Tue Sep 09 16:10:15 EDT 2008 | davef
We don't know a Siemens S-27 Error Code from a shoe box, but our old friend Stefan Witte is wizard on Siemens machines. He has posted some troubleshooting guidance on his site. If that doesn't help; contact him, plead for mercy, and he probably will
Electronics Forum | Thu Oct 04 15:43:46 EDT 2007 | bigdaddysoy9
Hello What type of error proofing methods are you guys using to prevent operators from using lead paste on a PB free application?
Electronics Forum | Fri Oct 05 12:03:20 EDT 2007 | patrickbruneel
In addition something to think about; If your operators are vulnerable to error so are the operators at the bar and paste manufacturer!!
Electronics Forum | Tue Sep 02 15:35:55 EDT 2008 | modernprecison
I have a Siemens S-27 and I'm having occasional issues with 0201 components in particular. I'm using the 12 segment head and 902 nozzles with them. I'm making sure the magnet is clean of debris and the feeder is sitting flat. Most of the time they
Electronics Forum | Tue Apr 17 13:07:17 EDT 2012 | rodrigo
Well... after much headache I found a bad relay contact in M1CR1E. The good news is somehow the axis are no longer jerking. The bad news is that it still does not work. When I turn it on now it shows this: emergency stop (in red) waiting for reset
