Electronics Forum | Thu Mar 02 11:38:34 EST 2006 | muse95
I am not intimately familiar with every resource available in our stores, but I don't believe we currently use or own any dessicant storage cabinets. MSD's, LF or not, are stored in sealed Moisture Barrier Bags with dessicant.
Electronics Forum | Wed Apr 12 09:33:10 EDT 2006 | jdengler
We had a similar problem and needed to slow the cam speed. The surface of our component was rough so I suspect we did not get a good seal for the vacuum and the component was drifting on the nozzle after the camera. Jerry
Electronics Forum | Mon Jul 10 21:20:05 EDT 2006 | davef
We'd: * Clamp vice grips on the leads to keep movement of the leads from weakening the seal between the leads and the plastic body of the device. * Bend each lead skyward [90* to the deck] at a different distance from the body. * Wrap the insulated w
Electronics Forum | Fri Aug 25 07:42:29 EDT 2006 | davef
Our sympathies about the ENIG boards. B:) So, you cut the end off the barrier bag, take 200 boards, heat seal the end of the bag and restock it, build the 200 boards and ship them, right?
Electronics Forum | Wed Sep 13 05:32:11 EDT 2006 | Rob
Hi Peter, are you talking about storage times after opening sealed packaging and the effects on solderability due to oxidisation/moisture sensitivity? Cheers, Rob
Electronics Forum | Mon Oct 02 05:51:46 EDT 2006 | dave
All, What controls do you have in place for PCB moisture control? If you had a kit of 400 and you ran out of a part which wasnot due in until 6 weeks- do you store the boards in a dry cabinet ? Vacuum seal and store on a rack? Alan...
Electronics Forum | Thu Nov 30 13:41:04 EST 2006 | john_smith
Pete, We have 2 Vapor Phase ovens and use a profiler from Data Pak that has a sleeve that seals out the Vapor for these ovens. This is pretty much the only system that we have found for these kinds of ovens. Contact them and they will hook you up.Tha
Electronics Forum | Thu Jan 11 17:01:43 EST 2007 | flipit
The N2 would allow you to use less flux since the oxidation level will be reduced in an oxygen free environment. How about using adhesive to attach the lid?
Electronics Forum | Thu Feb 15 13:49:10 EST 2007 | russ
only plug one side, you can definitely blow out during reflow process with a sealed via/ it is impossible for flux to be trapped in a blind via. Russ
Electronics Forum | Wed May 16 11:37:56 EDT 2007 | aj
Hi all, Are there special type bags which you need to use for Vacuum sealing Boards/tray parts etc. or are they just the standard anti-static bags ? aj...