Electronics Forum | Thu Aug 20 13:04:57 EDT 2015 | dyoungquist
Try Axiom Electronics in Beaverton. They do BGA X-ray and BGA rework/replacement for us. I don't know what your exact needs are but give them a try. www.axiomsmt.com
Electronics Forum | Thu Dec 03 14:51:57 EST 2015 | proceng1
The problem we ran into trying to do more intrusive reflow is that many of the TH parts could not withstand the temperatures for the reflow cycle. Solder preforms that could be placed by the Pick and Place was one of the avenues I explored trying to
Electronics Forum | Wed Jan 27 20:18:42 EST 2016 | lordorica
Trying to find a laser marking machine. Thing is that most of my pcbs have white solder mask, so the when trying to read the 2D code is difficult due to the lack of contrast. Any idea? a different technology? regards
Electronics Forum | Wed Jun 01 19:37:15 EDT 2016 | marcelll
You can try to null the axis, it's working sometime Also, lower the acceleration to 2000 instead of 4000 and the max velocity to 350 instead of 508. You can also try to swicht the Y1 driver with Y2 driver Do you have the AMC disks to troubleshoot ?
Electronics Forum | Thu Aug 11 15:43:45 EDT 2016 | freakshow
yea tried that, and tried replacing other relays too. really frustrating, schematics would be nice..
Electronics Forum | Fri Feb 03 15:39:01 EST 2017 | ttheis
Thanks, we'll try this too. We aquired an asymtek millenium for dispensing selectively. It is setup for epoxies with a needle dispense head so we'll try to make it all work for us. One-part silicones seem to be the popular solution.
Electronics Forum | Wed Apr 05 12:27:52 EDT 2017 | emeto
the package should have nozzle(midas) and camera pre-selected(hydra camera will not work(try standard or high resolution). Odd shape recognition type will not use auto teach option(try chip, leaded, BGA.... )
Electronics Forum | Fri Jun 23 12:11:26 EDT 2017 | rgduval
I haven't tried doing these, personally...but... - Try a pre-heater? - IR rework station? Off the top of my head, that's all I've got. Cheers, ..rob
Electronics Forum | Mon Mar 05 11:12:13 EST 2018 | assuredtech
Without a known good Executive and a known good battery and a known good Comm cable, card swapping / exchange is probably not going to be helpful yet. I might have an Executive you can try, I'll try sending you an e-mail.
Electronics Forum | Thu Apr 19 01:50:49 EDT 2018 | leeg
Whats the best way to joint a broken conveyor drive belt? Ive tried a rubber glue which lasts for a short time and tried touching both sides to an iron tip and then holding together, again with poor results.