Electronics Forum | Fri Sep 28 21:30:35 EDT 2012 | dekhead
Assuming you are not seeing 240VAC @ PSU inputs. Present @ transformer, but not much beyond CB1 on Y4... Nothing to PSU's or PC, etc. Inrush suppressor(s) (Thermistors). Contact me directly. www.dekhead.com
Electronics Forum | Thu Oct 04 10:00:57 EDT 2012 | jimmyboz
The IP3 AND the MTU4 each have a proper. From the main menu "editor-proper" and type "new" it will then ask which machine. After that, you should be good to go.
Electronics Forum | Fri Jan 18 21:53:25 EST 2013 | armandogomez
What version of software a re you using ? Some older versions of MyPlan have this problem? I have it with mine an is TPSys 2.4.6 and 3.3 MyPlan I cant ever get one right so I just use it as a guideline
Electronics Forum | Fri Nov 02 14:10:41 EDT 2012 | kahrpr
The versa flow is defiantly a better machine. However its not a fair comparison the versa flow costs about 4 times the cost of the ace. For the money the Ace is a good machine.
Electronics Forum | Fri Dec 07 15:55:34 EST 2012 | m79d
Hi i have operation/maintenance/specs manuals as pdf's i can send you I do not have the programming manual, I am looking for that myself rgds
Electronics Forum | Mon Dec 10 10:19:56 EST 2012 | cyber_wolf
You do not want get involved with MCS if you can avoid it. It's archaic old school that 3 people on the planet know how to use properly.
Electronics Forum | Thu Dec 20 11:37:16 EST 2012 | peteb
I agree with SrTech. MCS is old and not user friendly. If you decide to try it I have a MCS 16 installation manual collecting dust. You are welcome to it.
Electronics Forum | Wed Dec 19 12:31:14 EST 2012 | emeto
1. Check for pins or something else under the rails. 2. Check the motor for the axis and the sensor that defines up position(I doubt it there is an encoder for this motor) 3. check card 4. check interface cable
Electronics Forum | Sun Jan 06 00:09:23 EST 2013 | wesley
Hii ALL ... Here I found the problem I have with MCS. No one can give you an idea to get a floppy disk system V 2.4 or in the form of software. thank you
Electronics Forum | Mon Feb 04 06:48:50 EST 2013 | bobpan
Do a function 30 on the hht and you should get a nozzle height of around 200. If its not and its around 1 you have something on the quad align lens and you will have the exact problem you are having. Hope this helps... Good luck