Electronics Forum | Fri Jan 21 00:11:50 EST 2011 | jeffr
Yes you must select FixedTrayFeeder. You must select TEACHING not AUTOSET. The trap is... you must select a TEACHING UNIT prior to doing the teaching (CAMERA-HEAD1-HEAD2)are the choices. Press F8 to get this menu to appear. If the camera cannot reac
Electronics Forum | Thu Aug 04 22:02:25 EDT 2011 | fujiphil
IP3 camera calibration, you need the following: 1. Part camera resolution Jig. 2. 10mm nozzle for nozzle centering. 3. Button jig (skip). 4. Glass board and Glass parts. 1. Conduct the Camera resolution. Set the following Delta values: X=+/-0.1mm;
Electronics Forum | Mon Jun 19 23:08:01 EDT 2000 | Hermie
I'm looking for a Remote Camera Box for QUAD C series machines. Quad sells this in a kit (Box and Camera). I just need the Box. Can someone tell me if there's any CO. where I can buy just the Remote Box itself alone?
Electronics Forum | Wed Nov 17 03:58:18 EST 1999 | Bach Huss
Hi we are running S-15 here and the LED for the component camera is not all bringht at the same brightness level. This cause us to use different .gf for our standard component. It is hard to ballance the illumination level between machines. Does a
Electronics Forum | Thu May 13 12:24:26 EDT 2004 | cyber_wolf
We have an older line scan camera on our MY series machine.(The one that uses the X wagon trigger/encoder to turn on the line scan)When I go into the service program and turn the line scan camera to "camera action on" the LED's will only stay lit for
Electronics Forum | Thu Mar 10 04:12:01 EST 2005 | aj
Guys, I have a Dek Mk1-similiar to 265. I am having some intermittent problems with the Camera. The signal gets all fuzzy every now and again, by me disconnecting the power and reconnecting it works fine again . They are quite expensive to replace
Electronics Forum | Mon Aug 22 20:51:32 EDT 2005 | Cmiller
I was told by Assembleon that a Topaz can not be fitted with a 54mm camera. Only the 45mm. The Emerald? or whatever the 4 spindle machine is called, is the only one with a 54MM camera. Is this not true? I am talking used Topaz, 1997 to 2000 models. P
Electronics Forum | Wed Sep 07 11:45:05 EDT 2005 | GEB
The camera on the head of my Universal GSM1 (1994/5 model) displayed interference, and then the live video from it went red. This has never happened before. I've tried re-starting the machine, wriggling the camera feed wires, cleaning the lens etc. D
Electronics Forum | Fri Dec 16 12:50:34 EST 2005 | derengmao
I do have all tools for calibrate. The 4" plate is looked like for down-look camera. The big nozzle is for up-look camera. I did all the procedure in the handbook from Traning Center System from Quad. The up-look camera does see the nozzle, and passe
Electronics Forum | Mon Sep 22 11:26:19 EDT 2008 | mainenetservices
Does anyone out there know of anyone who can > repair the Green firewire camera (Cyberoptics) > off the Dek printers. I had 2 go bad and would > like to get them fixed if possible so I would > have backups. > > Thanks in Advance I can repair
