Electronics Forum | Mon Aug 28 10:51:51 EDT 2006 | SWAG
http://www.brigarelectronics.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=BE∏uct_Code=GP-MF552&Category_Code=C Seems to be working well. I didn't remove the housing from the machine = recal. The placements are right on, it's just a bit out of f
Electronics Forum | Tue Oct 24 13:41:25 EDT 2006 | jax
Everybody who uses basic "part-type" naming conventions for machine package codes will have this same issue unless restrictions are placed on who, how, and when the package codes can be altered. Some alternative methods to solving this problem: 1. U
Electronics Forum | Fri Apr 03 02:15:23 EDT 2009 | roy1209
I've heard from my company's engineer that it'll be better to use Gerber format if there's some impedance control line . Because usually Gerber has code numbers in data and someone can easily refer to controlled line on the PCB and ODB++ doesn't have
Electronics Forum | Tue May 10 09:45:53 EDT 2011 | veeckm
After changing mod codes 50,51 and 54,55 respectively on the HHT I will then goto ccconfig.sys file in the central controller software and manually enter in the new mod code values. I do not do any uploading/downloading of mod codes through database
Electronics Forum | Fri Nov 18 16:26:17 EST 2011 | olddog
Hi again Bob, I checked the theta motor coupling and the set screws are definately tight. I noticed that the theta motor drives an snti-backlash gear (nice design) so there is no play there. It appears that the gear drives a slotted shaft which is d
Electronics Forum | Mon Mar 03 13:18:02 EST 2003 | msivigny
Hello phil, The use of AOI systems give us the opportunity to auto-collect defect information much the way you're using them now. AOI systems become extremely effective when the collected data is used to perform some positive change into the process.
Electronics Forum | Tue May 23 20:35:03 EDT 2000 | Dave F
Ashok: Our procedure allows connecting a resistor of less than 1 Mohm between the mat and ground, if safety codes and/or other authorities require inclusion of a series resistor (to eliminate the safety hazard of touching a high voltage circuit with
Electronics Forum | Sat Nov 07 06:36:44 EST 1998 | Erhard
| I need to expand my barcoding of PWA's. I'm currently using code 39 format. Is there a std format specified? Per IPC? Is the a format which handles more then one data item, i.e. | part number, serial # and mfr's id #? | Code 128 gives you higher d
Electronics Forum | Mon Sep 28 09:18:30 EDT 1998 | Ben Wilmot
The majority of SMT resistors use the following notation. 10 X eg 153 represents 1k5 resistor The third digit in the sequence denotes the number of zeros to add after the first two digits giving the value in ohms. Many Caps will follow the same nota
Electronics Forum | Thu Aug 20 15:15:49 EDT 1998 | Wayne Bracy
| We are looking at implimenting a bar code system for a SMT | production line. To start we are looking at label printer/applicators. Are there any other companies that we should consider besides Zebra and Imtec?? Thanks for your input. | John Joh