Electronics Forum | Mon Oct 08 05:48:36 EDT 2012 | vinitverma
Dear Chris, N2324 and N2325 are for nozzle down sensors. THese sensors are located on the left and right side of the left and right walls of the head assembly respectively. There are very small holes in the walles through which these sensors transmi
Electronics Forum | Tue Jan 21 13:43:12 EST 2014 | rgduval
Jorge, Your description of the process sounds about right. A fixture to hold the flex cable taut (and in a repeatable location) that allows you to paste/place/reflow is essential. As for notes: Be hyper aware of moisture/humidity in regards to
Electronics Forum | Mon Mar 16 06:12:32 EDT 2015 | bobpan
The first thing to do is to change the z-rod. Sometimes a very old z-rod spring will weaken causing it to reject many parts. If it only rejects parts after a nozzle change....you may need to put some super lube grease on the O-rings on the bottom of
Electronics Forum | Sun Aug 06 20:50:57 EDT 2017 | leadthree
We have a client that wants to export modules to the USA, which they didn't do so far, and ask for UL status. I am a bit unclear about that, so I wonder what is needed? For the PCB it's clear, must be from a UL supplier. Does the UL number has to b
Electronics Forum | Tue Jul 02 10:27:31 EDT 2019 | BigFuji642
I tried using the cable on page 4. The DB9 to DB25. Is that the correct one to use with a USB to DB9 adapter? What is the difference between using MCS and C/C for communication? Which one should I be using and how do I see which one is being us
Electronics Forum | Tue Jul 02 10:57:29 EDT 2019 | BigFuji642
Are the pinouts for the cable mirrored (like normal Male to Female DB pinouts)? Like the Male pins when looking straight at them are 1 2 3 4 5 and the female when looking straight at it is 5 4 3 2 1 Or is it that they are not mirrored and both ar
Electronics Forum | Sat Aug 22 16:53:32 EDT 2020 | jmelson
I'm trying to diagnose a Quad QSA-30A machine that won't go ready. I have the machine technical drawings, they have overall machine schematics and cable wiring on most of the cables, but that's all. Does anyone have access to the schematics of the
Electronics Forum | Wed Jun 30 20:32:44 EDT 2021 | rgduval
Check the friction numbers...there could be an issue with the z-wagon bearings, or something else adding tension to the z-travel. Also make sure there are no cables interfering with the z-travel. Could be a cable that moves into the way at some spe
Electronics Forum | Wed Dec 14 15:26:38 EST 2022 | assuredtech
I'm inclined to think if you have done this procedure before and are doing it correctly, and you have successfully used that computer and comm cable before and you have used that Exec before and have recently proven out the computer comm port and set
Electronics Forum | Mon Jul 09 20:43:00 EDT 2001 | davef
I used http://www.google.com to find the following link: http://www.geocities.com/SiliconValley/Cable/5930/misc/cadexten.html
