Electronics Forum | Tue Aug 20 21:46:09 EDT 2002 | davef
Rinse => OSP Coat => Rinse => Dry Hot Air Solder Level: Preclean => Rinse => Flux Coat => Solder Coat => Hot Air Level => Cool => Soft Brush => Post Clean Rinse => Dry Look here http://www.epa.gov/opptintr/dfe/pubs/pwb/ctsasurf/download/pdf/ch2.pdf
Electronics Forum | Fri Aug 15 01:31:17 EDT 2003 | Jay
Hi All, I work for a contract manufacturing and we are having a new PCB to build. The PCB has OSP coating on it and it has been sitting open in the production floor for about 15 days. I am not sure weather it will affect the soldering process or not
Electronics Forum | Thu Sep 06 22:01:21 EDT 2007 | syedsmt
Hi! I am Syed from Hitachi located in Malaysia.It seems that the discussion about OSP is very much related to the dillema that I am facing in my company.I am the Senior Executive for the SMT Department at Hitachi.Currently we are facing some issues w
Electronics Forum | Sun Sep 09 22:57:05 EDT 2007 | syedsmt
Dear Members, Sorry,I might have not made myself clear on this issue and creating some confusion.Actually the problem faced is during the DIP Soldering process whereby one of the connector(IDE Pin) solder is cracked and lifted from the pattern.Visual
Electronics Forum | Mon Oct 09 10:58:26 EDT 2006 | Matt Smith
Over the past several months we have experienced intermittent problems with wave solder voids on PCBs coated with OSP. We suspect variation in the OSP application process, or oxidation of the surface due to insufficient or degraded OSP. Is there a me
Electronics Forum | Thu Jun 26 13:04:33 EDT 2003 | mderen
What are the handling requirments for PCB's coated with OSP? Also do most solder paste work the same with OSP or do I need to use a certain paste type?
Electronics Forum | Thu Apr 05 08:36:35 EDT 2001 | jmlasserre
use a solder join temperature of 200/210� whatever the pcb used (tin lead coated or osp or gold fash). 2nd ==> to adapt the temerature to the pcb used: - Reflow (200-210�) for tin lead coated pcb's (in this case we have just to reflow the solder
Electronics Forum | Fri Jun 27 10:27:59 EDT 2003 | davef
Since you�re asking the question about proper handling of OSP board, there may still be time to talk you out of using that material. * Cleaning of mis-printed board could cause non-wetting problems. This tends to remove a fraction of OSP coating. 0.3
Electronics Forum | Sun May 02 16:57:09 EDT 2004 | davef
You're correct. We prefer to probe solder, rather than copper, because the solder absorbs the impact of the probe better than copper and so, helps preserve the life of the probe. Beyond that, OSP has a limited "shelf life". If the OSP is not coate
Electronics Forum | Mon Jan 28 07:30:21 EST 2002 | cnotebaert
Is it just certain locations on the board, or is it random, does it occur on every board, does this happen on any other products you have been running? If this occurs only on the 1 board and in random locations I wouldn�t say its your wave setup. I
