Electronics Forum | Wed May 12 13:13:14 EDT 2004 | John S
Any one using samsung machines, CP40, CP50? I have a 24MM feeder that has 8MM pitch as lowest setting and I need to go to 4MM pitch. Any thoughts as to how I can achieve this? CP40/50 pushers are set for 1 push and higher. Thanks in advance
Electronics Forum | Fri May 14 12:55:27 EDT 2004 | spequipment
Does anyone know of anyone who repairs feeders? I have a client who needs the following- Ip3 (28) MSH2 (46) cp6(e)8x4 (09) feeders repaired.Most of them have all parts in intact, but they are non working. If someone can help us with this, let me
Electronics Forum | Tue May 25 18:12:14 EDT 2004 | gregp
I can't offer a recommendation but I have a question. Doing the math (4 x 430 parts = 1720 parts, 13 minute load time) I calculate 7938 cph. With mostly 0603 components why can't the Hydra head come closer to the claimed 21,000 cph rate? Am I miss
Electronics Forum | Tue May 25 12:59:37 EDT 2004 | gregp
Mils to MM is actaully English to metric. 1 mil is equal to 1 thousandth of an inch (0.001")or 0.0254mm so... 12mil pitch qfp is 0.012" or 0.3mm 15mil pitch qfp is 0.015" or 0.4mm 20mil pitch qfp is 0.020" or 0.5mm (Numbers are rounded)
Electronics Forum | Tue Jun 01 13:38:18 EDT 2004 | cyber_wolf
To maybe simplify, contact David Sbiroli(Apps. Engineer) @ Indium corporation. I have worked with Dave on this issue before. He can most likely get you the info you need. 1-800-4 INDIUM PS: Dave F. : My plasma arc accumulator has unusual carbon sco
Electronics Forum | Wed Jun 02 20:36:48 EDT 2004 | Ken
I personally would not get involved with any technology as old as the Q4C. I worked in a factory that had about 20 of those and was not impressed. It seemed like there was always some problem (electro/mechanical) and their service was not "world cl
Electronics Forum | Thu Jun 10 20:20:30 EDT 2004 | M.L. Feather
Is there a way to have one nozzle on the HSP Chipshooter 4796 to use a higher force of vacuum than the other nozzles? For instance, an 8x4 embossed feeder has components that are wedged hard into the plastic and cannot be pulled out with regular vacu
Electronics Forum | Tue Jun 15 12:54:34 EDT 2004 | jsmith01
It seems like the break is happening between the sn and ni. The parts are dull in appearance will not take solder even with an iron after they come off so it leads me to believe that there is only ni left on the part. The parts are liquidous for ab
Electronics Forum | Wed Jun 16 16:04:42 EDT 2004 | hulbert
An issue just came up concerning the color of FR-4. By accident we received a prototype board that was blue. We like the looks of it but can not justify a change because it looks cool. My questions are: 1: Why are most common PCB's green? 2: What are
Electronics Forum | Thu Jul 22 15:15:24 EDT 2004 | russ
You can purchase pad repair kits at some "radio shack" type stores or you can order them from some such as Circuit repair corp. If you know where the signal traces go from the individual connector pins I woul;d recommend just adding a wire frm the p