Electronics Forum | Thu Mar 19 21:09:09 EDT 2020 | sarason
Have you tried PCBSynergy? https://pcbsynergy.com then team it with Programming by Ealead https://ealead-e.ucoz.com/load/eps/1-1-0-1 sarason
Electronics Forum | Wed Aug 25 15:54:46 EDT 2010 | blnorman
I previously did a search on "peel back force" > and there were a few results, and there were a > few hits that say EIA-481 is the standard, but > nothing on what the standard force range is. A > search on "cover tape" yeilds many hits about >
Electronics Forum | Fri Jul 31 17:21:38 EDT 1998 | MMurphy
31 mil pitch components go either 1:1 or reduce 1 mil per side (you can reduce further if the foil thickness is > 7 mil.), you may want to try an oval shape here also.
Electronics Forum | Fri Jul 31 17:23:11 EDT 1998 | MMurphy
31 mil pitch components go either 1:1 or reduce 1 mil per side (you can reduce further if the foil thickness is > 7 mil.), you may want to try an oval shape here also.
Electronics Forum | Fri Jul 31 17:24:12 EDT 1998 | MMurphy
31 mil pitch components go either 1:1 or reduce 1 mil per side (you can reduce further if the foil thickness is > 7 mil.), you may want to try an oval shape here also.
Electronics Forum | Wed Aug 05 07:44:18 EDT 1998 | Joe Vella Ottosen
31 mil pitch components go either 1:1 or reduce 1 mil per side (you can reduce further if the foil thickness is > 7 mil.), you may want to try an oval shape here also.
Electronics Forum | Fri Jun 24 07:02:35 EDT 2005 | davef
Problem 1: Solder shortage * Stencil aperatures [except the heat slug] should be 1:1 with the board. * Stencil should be 5 thou thick laser cut. * Board should be 1:1 with the component * Print should look good. Problem #2: Bad connection between p
Electronics Forum | Thu Nov 09 13:26:08 EST 2000 | omar_verdugo
Somebody can help me with this problem.I already have installed the version of fujicam 1.2 but the machine interface that come with this don't work propertly this have a little problem with the rotation of theta is not the same with the theta assingn
Electronics Forum | Mon May 21 12:23:08 EDT 2001 | davis_brinkley
Why would you want AutoProgram for DOS? AutoProgram ver 5.3.2 is avilable from Quad Systems and is supported for using Windows 3.1.1 This is the latest rev for AutoProgram it is not supported for other operating systems because there is no more resea
Electronics Forum | Tue Jan 11 15:33:31 EST 2000 | Prawin Paulraj
Hello, I would like to request some information regarding the interfacing of SMT machines. i am of the understanding that it involves some interfaces like SMEMA 1.1,1.2 and SMPI. I would like to know more about the interfacing of machines using these
