Electronics Forum | Wed Jan 22 08:23:49 EST 2020 | dgiordano
Thank You! We don't vacuum seal - we just heat seal. The standard doesn't require vacuum sealing, correct?
Electronics Forum | Wed Jan 22 08:25:27 EST 2020 | dontfeedphils
I don't believe it does, but don't quote me on that. Vacuum sealers can be had for pretty cheap.
Electronics Forum | Thu Jan 23 07:41:32 EST 2020 | stephendo
Too much vacuum can be very bad. It can create isolated pockets where the desiccant can not do anything. It can poke holes in the bag at corners. It can even pull moisture into the bag if too strong.
Electronics Forum | Fri Mar 13 18:37:16 EDT 2020 | sarason
This error is an error from an Access database table. SO could be a damaged database file, a locked file associated with administration priviledges, or maybe the file server isn't running or there has been a change of file server ID etc. sarason
Electronics Forum | Fri Oct 16 19:33:26 EDT 2020 | emeto
Are you running Windows 7? If so, call them as there was some fix for Win7 on error like this.
Electronics Forum | Wed Sep 23 14:30:05 EDT 2015 | deanm
"...air evacuation is not required (Figure 3-5). Light air evacuation may be used to reduce the packaging bulk and enhance carton packing (Figure 3-6). Full evacuation shall not be used as it will impede desiccant and HIC performance and possibly lea
Electronics Forum | Thu Apr 01 03:44:31 EDT 2010 | nico67640
Good Morning Nicolas, > > Per J-STD-033B, 5.3.3.2 > states that a Dry cabintet maintained at not > greater than 5% RH may be considered MBB > storage. > > Hope this helps > > Chris Thanks Chris for your answer. I'm ok with you about the per
Electronics Forum | Fri Jun 05 14:22:28 EDT 2009 | rdoom
I found this morning that my old Fluidmove software has crashed. I also found out that my installation disk #3 of four is not good. The Fluidmove DOS software revision is 3.3G. Does anyone out there have a copy or image of the diskettes? Any Ideas o
Electronics Forum | Fri Jun 05 14:28:16 EDT 2009 | rdoom
I found this morning that my old Fluidmove software has crashed. I also found out that my installation disk #3 of four is not good. The Fluidmove DOS software revision is 3.3G. Does anyone out there have a copy or image of the diskettes? Any Ideas o
Electronics Forum | Mon Oct 18 08:11:49 EDT 1999 | Graham Naisbitt
20 times per hour. Lights should be behind "Georgian wired" glass rather than Ex'd' and all electrics should be hard-wired. Zone the room 1 = safest = around the coating machine and drying cupboards 1 meter from material. Zone 2 = > 1 meter away = OK