Electronics Forum | Thu Dec 11 09:15:06 EST 2014 | sreejhu
Hello Sir, Thanks for your reply. i just got a mail from the DIMA service group and they said the Oven setting is as follows: Max temp settings in each zone (Which is not the temperature on your product, but close to where the air flow comes out of
Electronics Forum | Mon Aug 19 05:08:24 EDT 2019 | gfe
I work for more than 18 years with the assembly of electronic equipment, more than 10 years with AOI machines from Marantz, since the model M22XFV-350 which is an old-school machine, currently we work with V series, the model V22XM-350 in RGB, this r
Electronics Forum | Wed Nov 08 20:32:19 EST 2000 | Dave F
There are several very good threads from a couple of years ago on selective soldering and solder fountain machines in the SMTnet Archives.
Electronics Forum | Fri Nov 10 23:40:11 EST 2000 | DL
John, for more on ceramic circuitry go here http://www.zecal.com/what.html This might help DL
Electronics Forum | Tue Aug 22 11:25:43 EDT 2000 | Steve Thomas
Just out of curiosity, what's the maximum length print the Pro Flo is capable of? I think the Cross Flow option for the EKRAs that we use only goes up to 350mm, which is way short of what we'd need.
Electronics Forum | Tue Jul 10 04:23:55 EDT 2001 | winnifred
Dr Lee, What is the best recommended setting temperature for solder iron station? 350 deg C ?? The contact of iron with the pad/lead should be for about 2-3 sec, is that true ?
Electronics Forum | Wed Jun 12 00:26:32 EDT 2002 | mjabure
If I remember correctly the standard we used was something like 350 candlepower at the work surface, and it can be measured with a standard photographic lightmeter
Electronics Forum | Tue Jun 01 19:25:19 EDT 2004 | Ken
...oops part 2: I will assume a sac 350 ball??? 217-218C this will completely reflow the ball and form a "normalized" joint with a collapsed structure.
Electronics Forum | Sun Aug 28 03:22:35 EDT 2005 | Leo_dektec
We have had this experience in China. Some of our customer produce aluminium radiator. They always ask us to design this type reflow oven for it.Because the large desire of the heat,we have to design the oven at a higher temperature.It's almost meet
Electronics Forum | Mon Nov 21 15:34:11 EST 2005 | guenther
According to the documentation that I have, the oven should reach 350c. This zone, set at 330c will not go above 314c.
