Electronics Forum | Mon Jun 14 11:57:59 EDT 2004 | azdback
We are in the process of evaluating the Circuit Cam software for the creation of pick and place programs and Visual aids for QC. So I would like to hear from actual users that can give me some feedback on the pros and cons of this product. Thanks in
Electronics Forum | Tue Nov 01 05:50:58 EST 2005 | dougs
Ken, what software do you use to aid your programming process? i've seen programs like GC-PLACE which could help verify customers cad data and rotations prior to setting up on a line, are there any others that the forum would recommend looking at?
Electronics Forum | Mon Mar 06 13:24:40 EST 2006 | slthomas
I would not want to be the guy responsible for a non-FDA approved eyewash in my first aid cabinet, for a lot of reasons. #1 is what could happen to someone if it went bad, #2 is what my executives would do to me for putting the shareholders at risk.
Electronics Forum | Thu Sep 21 10:52:43 EDT 2006 | russ
Could you not just switch to alcohol based flux? If your prob is getting the water off the board prior to hitting the wave, maybe you could install some type of convection to aid in this? Russ
Electronics Forum | Mon Jan 22 12:55:53 EST 2007 | russ
Volume req'd for pih is 2.2 x the hole volume after lead has been inserted. Stencils work quite well in PIH applications too if you can make aperture large enough. Slow squeegee speeds also aid in filling hole with paste. Russ
Electronics Forum | Wed Nov 07 09:25:17 EST 2007 | patrickbruneel
Associated Press article: http://www.courier-journal.com/apps/pbcs.dll/article?AID=/20071028/BUSINESS/710280414/1003
Electronics Forum | Fri Oct 17 15:49:29 EDT 2008 | skumaravelu
Does any one know of digital scope that can hooked to a PC to aid the QC inspectors in inspecting the solder joints. We tried the pyroscope(http://www.theproscope.com/) and it didn't work well. Thanks
Electronics Forum | Tue Oct 21 09:19:05 EDT 2008 | skumaravelu
30fps handheld scope(attached to a PC) to be used at the end of the SMT line after AOI inspection to aid the inspectors to review/clarify the locations that they observed in the AOI machine.
Electronics Forum | Mon Dec 22 10:24:06 EST 2008 | ck_the_flip
Yes I agree with Emil that the Jig/Fixture design is crucial for alignment. The hot-bar machine I worked with came with a digital camera and monitor to aid with alignment. Other than that, the right profile (heat, pressure and dwell), and a good fl
Electronics Forum | Sat Apr 18 17:42:07 EDT 2009 | billwestiet
I like this suggestion the best as a "band aid", check out some of the low tombstoning solder pastes. I've seen these work.