Electronics Forum | Wed May 22 14:17:13 EDT 2013 | ericrr
As the subject says, the trouble started when the computer (Windows 98) drove me nuts starting up in the morning. The Engineer comes along NEVER ASK ME ANYTHING, and thinks the network should have some network protocol (Example equivalent to TCP/IP
Electronics Forum | Tue Jan 12 09:59:13 EST 1999 | Russ Steiner
| I know that static concerns are very important in your work. Are static concerns eliminated by the antic-static devices you wear or which are in your environment, or do the hand tools you use, such as picks, tweezers and brushes, need to be anti-st
Electronics Forum | Wed May 22 15:56:43 EDT 2002 | stefwitt
The play of the tape is quite significant as I mentioned in an earlier thread. Tape width can vary between 8.1 +/- 0.2mm. Demos on 0201's are most likely done with 8.1 +/- 0.05mm tape. I guess you are referring to the cover tape pull, which can dispo
Electronics Forum | Wed Jul 10 22:45:06 EDT 2002 | davef
A field meter would be nice. Suppliers are: http://www.sar101.com/cpf/handheld.htm We like: M265, Stat Arc II [Monroe Electronics, 100 Housel Avenue, Lyndonville, NY 14098 800-821-6001]. It would be good to words like 'chopper stabalized' in the d
Electronics Forum | Fri Jan 10 10:09:42 EST 2003 | mantis
Hi In selecting or substituting a capacitor for use, consideration must be given to (1) the value of capacitance desired and (2) the amount of voltage to be applied across the capacitor. If the voltage applied across the capacitor is t
Electronics Forum | Sat Sep 25 08:59:59 EDT 2004 | davef
IPC-HDBK-830, Guidelines for Design, Selection and Application of Conformal Coatings says: A conformal coating may have several functions depending on the type of application. The most common are: * Inhibit current leakage and short circuit due to h
Electronics Forum | Tue Feb 14 14:26:13 EST 2006 | Chunks
Well, you don't want your paste to spoil! It'll give it a bad aftertaste. Actually, we refrig our paste mainly cause our stock room gets rather on the toasty side. Jars left un-friged will cause the metals to sink and leave a puddle of flux on top
Electronics Forum | Tue Mar 12 09:23:35 EDT 2013 | SMT Newbie
I was wondering if people could throw out some recommendations for what they think would be a good choice of machine for placing truely odd form components. Odd form meaning different types of custom shields ranging from rings to arcs. I know that
Electronics Forum | Tue Mar 12 10:16:05 EDT 2013 | bocci572
Yes the components are flat and no larger than 50mm in size. Most are full rings or just an arc of a ring. I understand fully the best way to have the capabilities proven would be to have the vendor demonstrate. I am kind of looking at what people
Electronics Forum | Thu Jul 04 23:17:24 EDT 2019 | 123456789
Today we will talk some other problems you may meet in the wedge bonding work. If you have any other supplement or suggestion, welcome to leave us message. Appear welding spot indentation on the frame, what's the causes? How to solve? 1.The Wedge’s
