Electronics Forum | Tue Oct 26 00:03:09 EDT 2010 | jmelson
Hmm, that's a fairly old machine, even older than mine! (I have a CSM84 PA130640). Anyway, it is best to program the machine from CAD system data, I wrote a little program in C to read in the component type and XYR position, and produce the file in
Electronics Forum | Fri Mar 17 09:03:52 EDT 2017 | daleb
Hello New to forum, I have a mpm ultra print 1500 can not find a lube coupler for the Z axis slide bearings. Does anyone know what it is and where could I find one. A standard grease coupling does not fit. Thanks Dale
Electronics Forum | Thu Mar 05 07:40:55 EST 2020 | tomdegas
I swapped the mi boards with ones from a working My12 machine and the same results. To recap my problem: On "Hardware Initialization" the center jaws open and close, the Hydra Theta belt moves back and forth, the Hydra head moves all the way down an
Electronics Forum | Fri Mar 06 19:32:09 EST 2020 | SMTA-Alex
The fact, that your Hydra head goes up and then starts moving slowly, means that it didn't find the limit. Since there are no mechanical obstructions and you swapped all the boards, the things to look at are cabling. Double check the ribbon cables fo
Electronics Forum | Wed Apr 04 19:27:07 EDT 2007 | davef
The easiest, long term cheapest, and most accurate way to measure top-side temperature is to use one like: * http://www.amazon.com/Fluke-62-Mini-Infrared-Thermometer/dp/B000MX5Y9C/ref=pd_sbs_auto_2/102-7460227-1828165 * http://www.amazon.com/gp/prod
Electronics Forum | Sat Aug 19 22:54:12 EDT 2023 | sonavc
Hi The machine run fine. Now I had the problem ZL or ZR driver Alarm. Turn on machine, everything is checked O.K I can be able to home the machine. When just start auto, the assembly or semi -auto. The machine is stopped, and show driver alarm ZL or
Electronics Forum | Thu Dec 15 01:21:42 EST 2005 | bvdb
We own a Fuji IP1 with all the manuals, etc. but can't figure out how to inch the tray robot. We can inch the X, Y, Z, Q axis and the SX and SY axis. All the axis auto zero OK (including the trays), but when I push the "4" key to inch the trays we
Electronics Forum | Tue Jul 23 10:36:51 EDT 2002 | blnorman
Actually this is for automotive (radio). According to TWI (the Welding Institute), European auto makers are mandating that suppliers of electronics replace lead in solder by January 1, 2003. I haven't been able to find which specific automotive com
Electronics Forum | Wed Dec 05 12:35:37 EST 2012 | ismael_duran
Hello, any one who can tell me where can I find the pneumatic manual for a machine model ACW02 is an AIR AUTO CLEANER, uses alcohol to clean and only air to dry the stencil.
Electronics Forum | Wed Sep 15 09:17:52 EDT 2010 | eniac
Hi all! Does any body know which company is real manufacturer of this reflow ovens? Manncorp is only distributor (and in USA), I can't buy it in USA and move to Eastern Europe :( I need to find who produce this ovens, can somebody help to me? Than