Electronics Forum | Fri Apr 08 20:37:09 EDT 2011 | tkirk
Just wanted to say thank you to everyone for your help. We will do a long bake for all future PCBs ordered from this vendor. TK
Electronics Forum | Tue Jan 06 14:37:27 EST 2009 | stevek
The easiest way to prove out the absorbtion theory is to weigh the parts before wash, after wash, and after baking. You probably want to do this with the bare parts in isolation as the fab will pick up considerable moisture. Differences in weight s
Electronics Forum | Fri Dec 16 08:00:26 EST 2005 | jax
What you are most likely dealing with: Insufficient Pure Sn layer ( multiple causes ) Because elevated temperatures accelerate the diffusion process, the thickness of the Pure Sn layer will reduce during every thermal cycle... ( bakeing PCBs, S
Electronics Forum | Tue Jul 06 07:49:08 EDT 2004 | davef
Q1)What is the MSD level for PCB? A1) There is none Q2)I have some PCB's with HIC (humidity indicator card ) has turn to pink at 50%. Should I bake the PCB prior to assembly process.This fab is a complex board with various kind advance package assem
Electronics Forum | Sat Jan 19 02:29:11 EST 2002 | ianchan
Thanks for the tips... found out the ex-employee guy, had pre-bake conditioning put into the process flow, as this pcb is made of polymide material, that is reputed to have historical patterns in thermal sensitivity. To avoid "thermal damaging" the
Electronics Forum | Tue Mar 17 10:47:56 EDT 2020 | davef
IPC-1601 covers PWB bake-out, methods for determining optimum bake time and temperature, caveats for certain PWB plating finishes, etc. IPC-1601 is to bare boards as J-STD-033 is to components
Electronics Forum | Fri Mar 26 14:40:00 EST 2004 | Willy
I am looking for a PCB fab shop capable of .65mm through-holes and very close tolerance internal spacing.Anyone out there?
Electronics Forum | Fri Jul 30 17:22:48 EDT 1999 | Dave F
| | Surface Mount Components like QFP's in Tray usually comes sealed in an anti-static plastic pack. In case the QFP's were removed from the said anti-static bag for more than 2 weeks, do these components needed to be baked for they might produce so
Electronics Forum | Fri Jun 01 16:13:45 EDT 2012 | kahrpr
You also need to get with the PCB manufacturer. Their is a lot that can go wrong with that many layers. If the manufacture is trapping that much moisture. you may have a hard time baking it out. Dave and Graham are right about the time and energy. It
Electronics Forum | Wed Mar 05 10:59:04 EST 2003 | jfb2003
Currently, my company's applies a PCB bake (5 hours @ 125C) for all SMT PCB's prior to surface mount assembly. Many of us believe this is a non-value added activity, and have concluded it can be eliminated. With today's PCB process controls coupled
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830
.gif)
