Electronics Forum | Tue Jun 13 13:40:20 EDT 2006 | Bob R.
Wow, good luck. None of my test results would be helpful since we use IPC-B-24 test boards as received from our board suppliers so we have a clear understanding of what we're shipping customers, not necessarily paste performance alone. We'll only cl
Electronics Forum | Wed Feb 26 23:59:48 EST 2003 | Mike Konrad
Grant, No-Clean paste + IPA = White Residue! #1: Stop using IPA #2: Switch to either a solvent-based de-fluxing chemical or an aqueous-based de-fluxing chemical. If you are using an ultrasonic cleaner for your boards as stated, do not use sapon
Electronics Forum | Thu Dec 08 12:39:39 EST 2016 | deanm
We have a name brand aqueous batch cleaner that uses a chemical and DI water to clean ROL0 flux from our PCBs. It does ok most of the time for SMT boards and we want to include through hole assemblies as well which should be a better cleaning process
Electronics Forum | Thu Dec 08 22:57:45 EST 2016 | ttheis
I'm not too experienced with this but what about an air-blast with an ionized air source such as an air knife above and below a conveyor to push most of the fluid off of the pcba then run through an oven just above vaporization temperature.
Electronics Forum | Fri Sep 07 14:09:57 EDT 2001 | aqueous
Hi Carol, Pressure requirements have changed over the past few years. In the recent past, aqueous cleaning systems relied on high flow, low pressure �flooding� techniques. 20 � 30 PSI pumped through large orifice nozzles. With ever increasing boa
Electronics Forum | Fri Dec 09 00:19:51 EST 2016 | aqueous
Hi Dean, We are a manufacturer of cleaning equipment. I'm not sure if your machine is one of ours or another brand. Regardless, I am happy to provide assistance. In order to maximize the level of "helpfulness", it would be helpful for me to know mor
Electronics Forum | Tue Oct 05 14:38:06 EDT 1999 | Debbie Alavezos
| | Hi, | | | | Help! Could anyone help to enlighten me on this? | | | | Question: | | | | If I have a CSP/BGA package of size X by Y and the standoff gap between the component and PCB is Z, What is the maximum allowable Y/Z or X/Z that using a n
Electronics Forum | Fri Sep 07 15:17:01 EDT 2001 | seand
Hello Everyone, Speedline Technologies' Electrovert Division does offer a number of batch and in-line systems for your cleaning application. A good contact for you to reach to discuss the details of your application would be Bill Boyde at the facto
Electronics Forum | Tue Oct 05 04:01:36 EDT 1999 | Brian
| Hi, | | Help! Could anyone help to enlighten me on this? | | Question: | | If I have a CSP/BGA package of size X by Y and the standoff gap between the component and PCB is Z, What is the maximum allowable Y/Z or X/Z that using a normal water cl
Electronics Forum | Fri Sep 07 15:20:27 EDT 2001 | ksfacinelli
We have two batch systems installed from Aqueous Technologies and have been very please with there performance and reliability. One machine is utilizing a 5hp pump and generates 60psi the other is a 3hp version and is about 40psi. I think the most
