Electronics Forum | Wed Aug 31 12:33:25 EDT 2005 | Jaya
I have expirence running,double sided Imm gold boards recently which ed up a lot of solderability issue. The Imm gold need to be slightly more control during reflow oven area on it's profile.
Electronics Forum | Tue Feb 19 07:44:41 EST 2008 | tonyamenson
So just to clarify.... If i bought a KIC 2000 I could run that one unit over both my waves and through both my ovens (leaded and lead-free)? Or would I need additional equipment to use it on the wave?
Electronics Forum | Wed Aug 07 12:35:36 EDT 2013 | cyber_wolf
I was asked how we verify that the thermocouples INSIDE the reflow oven are calibrated. That seems pretty impractical to me. Has anyone come across this ?
Electronics Forum | Thu Jul 06 13:36:37 EDT 2006 | SWAG
We've had much trouble with flex circuits. As previously mentioned, you must have local fids for the board or the BGA itself (if panelized). Other troubles we experience are drilled holes for pinned connectors. Unless the PCB manufactur has some w
Electronics Forum | Tue Sep 14 20:21:19 EDT 1999 | Pat Copeland
I am looking for help on doing smt equipment qualifications. I need to find some examples to follow. The equipment to be qualified is a Stencil Machine, Pick and place machine, and Reflow oven. We manufacture medical devices so it has to be somewhat
Electronics Forum | Sun May 28 23:01:31 EDT 2006 | jacksaria
Hello to all, We are encountered many problems/defects in SMT lines.I would like to know your suggestion or recommendation for SMT optimization and improvement. What are the step by step solutions in order to optimized and to improve the printer, pi
Electronics Forum | Thu Aug 08 13:09:38 EDT 2013 | cyber_wolf
Hege, there is no actual calibration of the thermocouple itself. You can however verify that they read correctly. Heller sells an option on their reflow ovens specifically for this purpose. I hoping that someone chimes in here that is NADCAP certifi
Electronics Forum | Thu Jul 22 17:39:58 EDT 2021 | proceng1
We do use a company for custom fixtures, but we also make some in house. The biggest hurdle for a board that requires a fixture to go through printing and SMT is that the board has to be the tallest thing. So any hold downs or locating hardware has
Electronics Forum | Tue Feb 19 09:41:26 EST 2008 | slthomas
ECD sells the MOLE, and they sell both the Oven Rider and the Wave Rider to accompany it. The thing is, you can profile both an oven and a wave machine without either if you're willing to just solder your thermocouples to a board. The nice thing ab
Electronics Forum | Wed Mar 05 03:43:58 EST 2003 | testing
Hi, Mike Thanks for the reply With your oracle system were you able to perfom SPC analysis? and if possible do you have any Material that may be helpful for me to get my system setup i.e. whether through Excel, Access, Oracle etc. + What are your
