Electronics Forum | Tue May 07 22:25:15 EDT 2002 | L_ch
Hello, As you know for the double side assembly PCBs, we normally first place the bottom side, then place top side after reflow soldering of bottom side. are there any other considerations for the sequence of reflow soldering ( bottoms side first, to
Electronics Forum | Tue Nov 27 07:36:29 EST 2007 | shy
solder the part is for SMT component (located at top side and bottom side) and wave solder is for THP (located at top side only).
Electronics Forum | Mon Dec 15 16:08:41 EST 2008 | dyoungquist
We have been running double sided surface mount pcb assembly for several years with no adhesive needed. We paste, place and reflow one side, then repeat the process for the other side. With Rs, Cs and small to medium ICs we have no problem with par
Electronics Forum | Sun Dec 02 22:00:21 EST 2007 | shy
The idea for solder at bottom side is for component such as SOIC, QFP and chip. This solder is needed since not entire bottom component had glue. that's why we're combining both solder paste and glue and reflow at the same time.
Electronics Forum | Thu Nov 29 13:05:46 EST 2007 | stepheniii
I really hate to ask but must. Are the components that are falling off, the components that don't have glue? Seriously not all the parts on the bottom are glued on? How do they stay on during the wave? The normal way is to run the top SMT as normal
Electronics Forum | Fri Nov 30 08:35:51 EST 2007 | stepheniii
We put glue on the bottom of the board that already has the topside SMT mounted. We populate the board. We put it through a cure profile. At this stage the topside components are soldered on. The bottom side components are glued on with NO solder on
Electronics Forum | Thu Mar 15 16:58:11 EST 2001 | mparker
The only way I know of waving the bottom side with SMT parts installed without epoxy would be to use a masking media, Kapton Tape, wave pallet that keeps those parts from being susceptible to gravity once the connections are reflowed. If there is ano
Electronics Forum | Tue Oct 26 11:22:45 EDT 1999 | Morris
I am evaluating a bottom side glueing process. I was wondering if anyone could share their shear force specifications, or how they were developed. I would be most interested in the 0805 and Sot23 package types. Also, does anyone know if heating th
Electronics Forum | Thu May 09 16:04:07 EDT 2002 | stownsend
The lighter the component, the more likely it is to stick to the solder on the bottom reflow side. All boards I have worked with, the descrete components (R's and C's) are placed first (bottom side), reflowed, then the active components (IC's) are pl
Electronics Forum | Tue Mar 13 18:25:45 EST 2001 | slthomas
Anyone doing a print-dispense-place-reflow process? I've never heard of it being done this way before today. Don't know why, actually, as it sounds like a fairly friendly method provided the adhesives used are happy with a standard reflow profile.
