Electronics Forum | Wed Dec 09 13:25:16 EST 1998 | Martin J. Ibarra
Hi, I know for sure that by controlling temp. and humidity conditions in SMT assy lines room, one gets advantage in screen printing, adhesive dispensing, and pick&place machines mainteinance. Does any one have any advice on why else is a clean room
Electronics Forum | Fri Sep 25 11:07:45 EDT 1998 | Chris Fontaine
We use dry boxes manufactured by DMS Clean Room Products in Lawrence, MA. The phone number on the tag is (508)683-2325, but I think their area code changed to either 978 or 781 recently. We flow dry nitrogen through the box in order to ensure that
Electronics Forum | Wed Apr 06 11:47:17 EDT 2005 | jdengler
Dave, Most dust and other crud is actually generated inside a plant. While working at another company they brought in consultants for this same issue. I don't remember the exact amount but only around 20% comes from the outside. Unless you are
Electronics Forum | Thu Apr 07 08:02:44 EDT 2005 | Grant
Hi, I used to run a clean room, and it's right, most of the dust is created internally. You will need to add some HEPA filtering to the area, and an air handling unit that can control temp and humidity as well to get correct environmental control.
Electronics Forum | Thu May 04 02:07:44 EDT 2006 | CW
Hi, There are a couple of Omniflow 7 and 7E that are being used in the production. Recently we found a lot of flux clogging up the exhaust ducts. Anybody who uses the same type of tool who has seen this kind of problem? How can we fix this? Does
Electronics Forum | Mon Nov 06 13:35:10 EST 2006 | Theresa Spear
We are starting up a new clean room for SMT production and wondering if anyone is aware of any guideline for operating humidity and temperature ranges for the room. We know that the MSD's will prefer it to be dry and cool. However, there are other f
Electronics Forum | Mon Mar 05 18:04:43 EST 2007 | stepheniii
If it might go in a clean room you will want to look at if the system cuts the paper tapes. In the old days there was no vacuum at the cutter and around the machine would accumulate white dust from the machine cutting the tape for each component. The
Electronics Forum | Fri Mar 09 14:33:11 EST 2007 | oldsmtdude
I would concur about clean room problems especially with a high mix changeover environment. Paper tape is horribly dusty and just the cover tape pulling away generates a lot of dust. There was a day when everyone said paper was on the way out for
Electronics Forum | Tue May 25 11:34:02 EDT 2010 | jmedernach
Hi, Use nitrile or latex gloves for handling your product from your pre-coating cleaning step onward. In my opinion, conformal coating should be isolated from the rest of the factory floor. I'm not saying you need a clean room or even a white room.
Electronics Forum | Thu Oct 21 13:08:38 EDT 2021 | ademrah
Hi, It depends on smallest pitch size of your components. For the 0.3 um, 0.5 um, etc. sizes could be mentioned on Clean Room. For example; for ISO-7 standart (Class 10,000) higher than 5um is not acceptable, however 1mm can acceptable to describ